Best current price£25.31from eBay
Shopping.co.uk recommended and popular offers
eBay£25.31Visit shop Etronix ET0209 Peak Plus Hyper Delta AC NiMH/LiPo 1/3/5A Charger (Tamiya/Deans)
Visit shop6 offers from £25.31 - £32.98
View price history by clicking the chart icon.
The Etronix Powerpal Peak Plus AC Charger (ET0209) is designed for hobbyists and enthusiasts who need a versatile and reliable charger for their NiMH and LiPo/LiFe batteries. Its key benefit is the selectable charge rates and individual cell balancing, ensuring optimal battery health and performance, housed within a durable alloy case. A minor caveat is its focus on 2-3S LiPo/LiFe batteries, limiting its use for higher cell count packs.
| Model Part Number | ET0209 |
|---|---|
| Brand | Etronix |
No, the Etronix Powerpal Peak Plus AC Charger is designed for LiPo/LiFe batteries with cell counts from 2S to 3S only.
Delta-Peak sensitivity is a feature for NiMH batteries that detects a small voltage drop after the battery is fully charged, signaling the charger to stop, thereby preventing overcharging.
Yes, this charger includes the AC power cable but requires separate battery charging leads and connectors appropriate for your specific battery type (e.g., Deans, XT60, T-plug, etc.).
The charger has a maximum circuit power of 50W, which limits the maximum charge rate depending on the battery voltage.
There is a physical selector on the charger unit that allows you to choose between 1.0A, 3.0A, or 5.0A charge current.
No, this is a single-port charger and can only charge one battery at a time.
Product warranty information is typically found with the retailer or manufacturer's official documentation and is not specified in the provided product details.
Ensure the AC power cable is securely connected to both the charger and a functional wall outlet. Verify the wall outlet is receiving power.
Check that the battery is correctly connected to the charger lead and the lead is properly plugged into the charger. Ensure the battery type and cell count are within the charger's supported range (NiMH 1-8S, LiPo/LiFe 2-3S). Inspect charging leads for damage.
This could indicate overheating. Ensure ventilation slots are unobstructed and the charger is not in direct sunlight or a confined space. Allow the charger to cool down before attempting to charge again. If the issue persists, the battery may have an internal fault.
Ensure the balance lead is correctly connected to the charger's balance port. If the imbalance persists after a full charge cycle, the battery pack may have aged cells or an internal issue requiring professional attention or replacement.
Setup:
Compatibility:
Care:
