Manfrotto 492 Centre Ball Head - Cold Shoe Mount
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Manfrotto MH492LCD-BH is designed for videographers who need to mount an external monitor or recorder to their camera setup. Its key benefit is providing stable, adjustable support for your viewing device, allowing for precise framing and monitoring. A potential caveat is its compact size, which may be less suitable for extremely heavy accessories. This versatile mini ball head supports up to 4 kg, features a standard cold shoe mount for easy camera attachment, a universal 1/4" screw for monitors, and a single knob for controlling both pan and tilt movements.
All features
| Brand | Manfrotto |
|---|
Extended Product Information
FAQs
What is the maximum weight this ball head can support?
The Manfrotto MH492LCD-BH can support a maximum weight of 4 kg (approximately 8.82 lbs).
How do I attach my monitor to this ball head?
Your monitor or recorder attaches via the universal 1/4" screw located on the top of the ball head.
Does it attach directly to my camera?
Yes, it features a standard cold shoe mount that slides into your camera's hot shoe for easy attachment.
How are the pan and tilt movements controlled?
Both pan and tilt movements are controlled and locked using a single ergonomic knob.
What material is the ball head made from?
It is constructed from durable and lightweight aluminium.
What are the dimensions of the ball head?
The ball head has a height of 76 mm and a base diameter of 3.5 cm.
Can this ball head be used in extreme temperatures?
Yes, it is designed to operate within a wide temperature range of -30°C to 70°C.
Troubleshooting
Monitor is wobbly or not holding position
Ensure the single locking knob is fully tightened. Check that the monitor's weight does not exceed the 4 kg capacity. Verify the 1/4" screw is securely fastened.
Cold shoe mount feels loose on the camera
Make sure the cold shoe adapter is fully seated in the camera's hot shoe. Check for any obstructions in the hot shoe or on the adapter itself.
Difficulty moving the ball head
Loosen the single locking knob completely. If still stiff, gently clean the ball joint area with a dry cloth to remove any dust or grime.
Pros and Cons
Pros
- Extremely lightweight and portable
- Securely holds monitors up to 4kg
- Easy single-knob adjustment for pan and tilt
- Durable aluminium construction
- Versatile mounting options with cold shoe and 1/4" screw
Cons
- Limited front and lateral tilt angles (-90°/+40°)
- No built-in spirit level for precise horizontal alignment
- Pan lock is not independent of the tilt lock
- May be too small for very large or heavy monitors
Setup, Compatibility & Care
Setup:
- Attach the cold shoe mount to your camera's hot shoe. Ensure it clicks into place.
- Screw your external monitor or recorder onto the 1/4" thread on top of the ball head.
- Use the single ergonomic knob to loosen the ball head for movement. Adjust the position of your monitor.
- Tighten the knob to lock the monitor securely in place.
Compatibility:
- Compatible with any camera featuring a standard hot shoe mount.
- Supports external monitors and recorders with a 1/4" female thread (up to 4 kg).
- The aluminium construction is durable, and the ball head is designed for a wide range of operating temperatures (-30°C to 70°C).
Care:
- Clean the ball head with a dry or slightly damp soft cloth. Avoid harsh chemicals.
- Periodically check that all screws and mounting points are secure.
- Keep the ball head free from dust and debris, especially around the ball joint and locking mechanism.