Ski Goggles - Smith 4D Mag

Best current price£270.00from Wallis
Best offers
Shopping.co.uk recommended and popular offers
Wallis£270.00Visit shop Smith 4D Mag Black ChromaPop Sun Green Mirror Ski Goggles + Bonus Lens
Visit shop
Best current price£270.00from Wallis
Shopping.co.uk recommended and popular offers
Wallis£270.00Visit shop Smith 4D Mag Black ChromaPop Sun Green Mirror Ski Goggles + Bonus Lens
Visit shop1 offer from £270.00
View price history by clicking the chart icon.
The Smith 4D MAG S goggles are designed for skiers and snowboarders with smaller faces seeking an expansive field of view and exceptional optical clarity. Their key benefit is the rapid magnetic lens-change system combined with sharp ChromaPop optics, allowing for effortless adaptation to changing conditions. A potential caveat is that while designed for smaller faces, fit can still vary individually. These goggles integrate advanced technology for clear vision, comfort, and fog-free performance on the slopes.
| Model Part Number | 716736731711 |
|---|---|
| Brand | Smith |
Use only the provided microfiber goggle bag or a clean, soft lens cloth. Gently wipe the lens in a circular motion. Avoid using tissues, paper towels, or chemical cleaners, which can scratch or strip lens coatings.
ChromaPop enhances contrast and color, helping to filter out 'confusing' light wavelengths and allowing the wearer's eyes to process information more easily. This results in greater detail, clarity, and definition.
The system uses strategically placed magnets within the goggle frame and lens that guide the lens into place for a secure and quick swap. This allows for rapid adaptation to changing light conditions.
Yes, the features such as wide field of view, anti-fog technology, and secure fit are beneficial for both skiing and snowboarding.
The Smith 4D MAG S goggles typically come with two ChromaPop lenses (one for bright conditions, one for low light), a protective hardcase, and a microfiber goggle bag with a spare lens sleeve.
These goggles are designed to be OTG (Over-The-Glasses) compatible, meaning they can accommodate most standard prescription eyewear underneath. However, fit can vary depending on the size and shape of your glasses.
Lenses should be replaced if they become significantly scratched, delaminated, or if the optical clarity is compromised. For most users, with proper care, lenses can last for multiple seasons.
Ensure the AirEvac ventilation ports are not blocked by your jacket or helmet. Make sure the lens is properly seated in the frame. Avoid touching the inside of the lens. If fogging persists, try swapping to a lens designed for the current light conditions.
Ensure your hands are clean and dry. Pull the lens away from the frame at the designated magnetic points. Do not force the lens; allow the magnets to guide it into place when reattaching.
Adjust the ultra-wide strap for a secure but not overly tight fit. Ensure the goggles are positioned correctly on your face, especially if using a Low Bridge Fit option. Verify compatibility with your helmet to avoid pressure points.
Avoid storing lenses uncovered or in direct contact with hard surfaces. Use the provided microfiber bag for storage. Minor surface scratches may be unavoidable with use; if significant, consider replacing the lens.
Initial Setup: Unpack your goggles and the included spare lens. The MAG system uses magnets embedded in the frame and lens to align and secure the lens. To swap lenses, gently pull the old lens away from the frame; the magnets will release. Align the new lens with the frame and it will snap into place. Ensure the lens is fully seated around the entire frame.
Compatibility: These goggles are designed to integrate seamlessly with most Smith ski helmets, providing optimal airflow and fit. While they can be worn with non-Smith helmets, the fit may vary.
Care: Store your goggles in the provided microfiber bag with the spare lens sleeve to prevent scratches. Clean lenses using only the microfiber bag or a dedicated lens cloth. Avoid using abrasive materials or chemical cleaners, as these can damage lens coatings. Wipe foam gently with a damp cloth if necessary, and allow it to air dry completely before storing or wearing.