Weldtite Ball Bearings - 1/4" - 24 Balls

The frequency depends on usage and riding conditions. Inspect and service your components every 6-12 months, or sooner if you ride frequently or in harsh conditions.

While the grease is ideal for bearings, it's generally safe to use on other moving parts. Check the manufacturer's recommendations for specific components.

You'll need basic bike repair tools, including wrenches, screwdrivers, a bearing puller (if necessary), and a grease gun or applicator.

The number of bearings required will vary depending on the component. The kit includes 24 bearings, which should be sufficient for most applications. Check your specific component's requirements.

Excess grease can attract dirt and debris. Wipe off any excess after assembly to prevent contamination.

Use a degreaser and a clean rag or brush to remove old grease from the bearing races and bearings.

This kit is designed for bikes that use 1/4 inch ball bearings in their hubs, bottom brackets, or headsets. Mountain bikes, road bikes, and hybrid bikes may all utilize this bearing size.

Disassemble the component, clean the races, and replace the ball bearings with Weldtite 1/4 inch bearings. Re-grease thoroughly.

Check the bearing adjustment. If bearings are worn, replace them with Weldtite 1/4 inch bearings and re-grease.

Check for excessive friction. Disassemble the component, check for any obstructions, replace bearings if necessary with the Weldtite 1/4 inch bearings, and re-grease.