XL Joinery Internal Oak Pre-Finished Suffolk 2Xg Fire Door With Clear Etched Glass - 1981 X 686 X 44mm (27")

FD30 certification means the door is tested and proven to resist fire for a minimum of 30 minutes, providing crucial escape time in the event of a fire.

The door comes pre-finished in a natural oak veneer. While it is possible to apply further finishes, it is recommended to consult the manufacturer's guidelines to ensure fire integrity is not compromised.

To maintain the fire rating, it is advised to trim no more than 3mm from any single edge. Always consult the manufacturer's specific trimming recommendations.

While suitable for internal use, its use in very humid environments like bathrooms should be carefully considered. Ensure adequate ventilation and avoid excessive moisture, which can affect the wood veneer over time.

Due to the solid engineered core, it is recommended to use robust, good-quality hinges that can support the weight of the door. Fire-rated hinges may be required depending on the installation.

For optimal fire safety performance, it is highly recommended to install the fire door within a fire-rated door frame, especially if it is part of a fire-resisting structure.

Use a standard glass cleaner and a soft, lint-free cloth. Avoid abrasive materials that could damage the etching.

Check the door frame for squareness and plumbness. Ensure hinges are correctly installed and suitable for the door's weight. Minor adjustments may be possible with hinge alignment.

For minor scratches, a wood repair kit designed for oak veneer may be used. Prevention is key; handle the door with care during and after installation.

Ensure the door frame is correctly sized for the door. For fire doors, gaps should be filled according to fire safety regulations, typically with intumescent sealant or strips.

Ensure the glass cleaner used is appropriate for etched glass and that a soft, lint-free cloth is used for cleaning.