Best current price£40.53from eBay
Shopping.co.uk recommended and popular offers
eBay£40.53Visit shop Sealey Rechargeable 360 Inspection Lamp 7 SMD + 3W LED Black - Part No. LED3602
Visit shop
B&Q£52.07Visit shop B&Q - Led3602 Rechargeable 360Deg Inspection Lamp 7 Smd + 3W Led Black Li-Ion
Visit shop6 offers from £40.53 - £60.98
View price history by clicking the chart icon.
The Sealey LED3602 Rechargeable Inspection Lamp is designed for mechanics, DIY enthusiasts, and anyone needing versatile, hands-free illumination in tight spaces. Its key benefit is the 360-degree swivel and tilt function, allowing light to be directed precisely where needed, complemented by bright SMD LEDs and a powerful top torch. A potential caveat is the reliance on USB charging, which may be less convenient than traditional power adapters for some users.
| Colour | Black |
|---|---|
| Model Part Number | LED3602 |
| Brand | Sealey |
On the high setting (350 lumens), the operating time is approximately 3.5 hours. On the low setting (200 lumens), it lasts up to 7 hours. The top 3W LED torch provides up to 8 hours of use.
The lamp has a charging time of approximately 3.5 hours.
The lamp has an IP54 rating, meaning it is protected against dust ingress and water splashes from any direction. It is not designed for full immersion in water.
The seven SMD LEDs provide a lumen output of up to 350 lumens on the high setting and 200 lumens on the low setting.
Yes, the lamp can typically be used while it is charging via the micro USB port, although performance might be affected by power draw.
The minimum length is 255mm, the maximum length is 270mm, and the overall dimensions including housing are approximately 322mm (Height) x 186mm (Width) x 62mm (Length).
Yes, the Sealey LED3602 is supplied with both a mains charger and a USB cable for charging.
Ensure the lamp is fully charged. Connect it to the charger and verify the charging indicator. If still unresponsive, try a different USB cable and power source.
The battery may be low. Recharge the lamp. If the issue persists after charging, the LEDs might be nearing the end of their lifespan, though this is uncommon with LED technology.
Ensure the magnetic surfaces on the lamp and the mounting surface are clean and free from grease or debris. Magnets work best on clean, flat ferrous metal surfaces.
Check the USB cable and charger for damage. Try a different USB cable and a known working USB power source. Ensure the micro USB port on the lamp is clean.
Setup: The lamp is ready to use out of the box. To charge, connect the supplied USB cable to the micro USB port on the lamp and the other end to the mains charger or a compatible USB power source.
Compatibility: The micro USB charging port is compatible with standard USB power sources. The lamp itself is designed for inspection and task lighting purposes.
Care:
