Best current price£7.99from Joybuy UK
Shopping.co.uk recommended and popular offers
Joybuy UK£7.99Visit shop Anycubic Joybuy X Pla Basic Printing Filament, 1Kg Spool, 1.75Mm Diameter, ±0.02Mm Tolerance - Clear 6974662351821
Visit shop1 offer from £7.99
View price history by clicking the chart icon.
Designed for 3D printing enthusiasts and professionals, the ANYCUBIC PLA Basic Clear filament is an excellent choice for creators seeking reliable layer adhesion and high-detail output for functional prototypes or artistic models. It offers exceptional dimensional accuracy for consistent feeding, though users should be mindful that like most PLA materials, it is sensitive to high heat environments and should be stored in a dry place to prevent moisture absorption.
| Brand | ANYCUBIC |
|---|
The recommended nozzle temperature is between 190°C and 210°C.
While not strictly mandatory, a heated bed set to 50°C - 60°C is highly recommended to improve adhesion and prevent warping.
Yes, this filament is designed to be compatible with almost all standard FDM 3D printers that accept 1.75mm diameter filament.
Store it in a cool, dry place, ideally inside its vacuum-sealed bag with the desiccant pack included.
PLA is biodegradable and may deform if left in high-heat environments or direct, prolonged sunlight, so it is generally not recommended for outdoor use.
The filament maintains a high-precision tolerance of ±0.02mm.
Check your nozzle temperature; if too low, the filament may not extrude correctly. Also, ensure the hotend fan is working properly to prevent heat creep.
Clean the build plate to improve adhesion, increase the bed temperature, or apply a light layer of adhesive (like glue stick) to the print surface.
The filament has absorbed moisture. Dry the spool in a designated filament dryer for 4-6 hours at 45°C.
This filament is compatible with most 1.75mm FDM 3D printers. For best results, use a nozzle temperature between 190°C and 210°C and a build plate temperature of 50°C to 60°C. Always store the spool in the provided vacuum-sealed bag with desiccant when not in use to avoid moisture accumulation. If the filament begins to "pop" or hiss during printing, it has absorbed moisture and should be dried in a filament dryer or oven at low temperatures before use.
ANYCUBIC PLA Basic - Brown - 1kg - 1.75mmFrom £8
Flexi New Classic Tape Dog Lead 8m Black LargeFrom £21
Hozelock 60m Wall Mounted Hose Reel - Green - 2390From £58
Colorail Stainless Steel Rail End Socket - SilverFrom £6
ANYCUBIC PLA Basic Printing Filament - Blue - 1kgFrom £8
Flomasta Plastic Round Threaded Blanking Plug - Dia 25mmFrom £4
Turtle Beach Atlas Air Gaming Headset - BlackFrom £130
Mixx Audio Headphones - StreamQ C2 - Black - Wireless Bluetooth Over-Ear EarphonesFrom £25
Penn Squall II Level Wind Reel - 20 Right Hand WindFrom £130
Abu Garcia Ambassadeur Round Reel - C3-7000From £180
Beats by Dr. Dre EP Wired On-Ear Headphones - BlackFrom £200
Lezyne Zecto Drive 250+ / Zecto Drive 200+ Pair - BlackFrom £57