Best current price£300.00from eBay
Shopping.co.uk recommended and popular offers
eBay£300.00Visit shop Old Blood Noise Endeavors Dark Star Stereo Soundscape Reverb Effects Pedal (NEW)
Visit shop2 offers from £300.00 - £323.76
View price history by clicking the chart icon.
This guide is for musicians looking to expand their sonic palette with a versatile stereo reverb pedal. The Old Blood Noise Endeavors Dark Star Stereo provides pitch-shifting, bit-crushing, and filtering capabilities, allowing for unique ambient soundscapes. Note that mastering all features may require some experimentation due to its wide range of options.
| Colour | Black |
|---|---|
| Model Part Number | OBN-DARKSTS |
| Brand | Old Blood Noise Endeavors |
The Dark Star Stereo requires a standard 9V DC power supply with a center-negative polarity. The power supply is not included with the pedal.
Yes, while the pedal is optimized for stereo use, you can use the mono output if you're only using one amplifier or a mono signal chain.
Refer to the user manual for detailed instructions on saving presets. Typically, it involves adjusting the parameters to your desired settings and then saving the configuration to one of the pedal's preset slots.
Yes, the Dark Star Stereo has a bypass mode to switch the effect on and off without altering the original signal.
Yes, the Dark Star Stereo offers full MIDI control, allowing you to change presets and control parameters using a MIDI controller or sequencer.
The Dark Star Stereo can create a wide range of sounds, from subtle ambient reverbs to heavily textured and experimental soundscapes, thanks to its pitch-shifting, bit-crushing, and filtering capabilities.
Check all cable connections. Verify that the pedal is powered on and that your amplifier volume is turned up. Make sure the input and output levels on the pedal are adjusted correctly.
Ensure you are using a properly isolated power supply to minimize ground loop hum. Check your cables and connections for any potential interference. Experiment with the placement of your cables to minimize noise.
Consult the user manual to confirm the preset saving procedure. Ensure you're following the correct steps for saving presets and that the pedal's memory is not full.
