Best current price£38.62from eBay
Shopping.co.uk recommended and popular offers
eBay£38.62Visit shop AstroAI L4 Cordless Car Tyre Inflator 6600mAh Battery Portable Air Compressor
Visit shopeBay£38.62Visit shop AstroAI L4 Cordless Car Tyre Inflator Air Compressor 6600mAh 150PSI 40Mins
Visit shop4 offers from £38.62 - £50.62
View price history by clicking the chart icon.
The AstroAI L4 Portable Air Compressor is designed for drivers who need a reliable and portable solution for tire inflation. Its key benefit is rapid, high-pressure inflation up to 150 PSI with smart presets for various uses, eliminating the need for manual pumps or frequent gas station visits. A minor caveat is that while powerful, it's intended for topping up or refilling tires, not for industrial-level continuous use.
| Model Part Number | L4 |
|---|---|
| Brand | AstroAI |
A full charge typically takes approximately 3-4 hours when using a standard USB power adapter. Charging time may vary slightly depending on the power source.
Yes, the AstroAI L4 can be used for inflation while it is connected to a power source for charging.
The AstroAI L4 has a maximum pressure capability of 150 PSI.
On a single full charge, you can inflate approximately 12 car tires (size 195/55/R15) from empty, or significantly more for partial top-ups, thanks to its 40-minute runtime.
Yes, the AstroAI L4 is compatible with car tires that have TPMS. It inflates the tire directly, and the TPMS sensor will register the new pressure.
Yes, the AstroAI L4 is designed to automatically shut off once the preset target pressure is achieved.
Please refer to the product packaging or AstroAI's official website for the most current warranty information, as it can vary.
Ensure the L4 is adequately charged. Connect it to a power source and check if the charging indicator lights up. If fully charged and still unresponsive, contact customer support.
Verify that the air hose is securely connected to both the compressor and the tire valve. Check the tire valve for any obstructions. Ensure the selected mode and pressure settings are correct.
The unit may have reached its set target pressure. If it stops unexpectedly, check the battery level. If the battery is low, recharge the unit. Ensure the unit is not overheating; allow it to cool if necessary.
Ensure the hose is properly sealed onto the valve stem to prevent air leaks. Allow the reading to stabilize after inflation. If persistent inaccuracy is noted, try using a separate calibrated tire pressure gauge for comparison.
Setup:
Compatibility:
The AstroAI L4 is compatible with standard car, motorcycle, and bicycle tires, as well as sports balls that require inflation. It uses a standard screw-on valve connector.
Care:
