Marblesque Wallpaper - White

Best current price£23.00from The Range
Best offers
Shopping.co.uk recommended and popular offers
The Range£23.00Visit shop Fine Decor Marblesque Wallpaper - White
Visit shop
Best current price£23.00from The Range
Shopping.co.uk recommended and popular offers
The Range£23.00Visit shop Fine Decor Marblesque Wallpaper - White
Visit shop2 offers from £23.00 - £26.00
View price history by clicking the chart icon.
This Marblesque Wallpaper in White is ideal for homeowners looking to add a sophisticated, natural texture to their interior spaces. Its key benefit is the realistic marble effect, offering a high-end look with the simplicity of wallpaper application. A potential caveat is the 53cm offset pattern match, which requires careful planning during installation to ensure a seamless finish.
| Colour | White |
|---|---|
| Model Part Number | UTAG963 |
| Brand | Fine Decor |
This is a paste-the-paper wallpaper, so you should use a high-quality wallpaper adhesive specifically designed for this type of application. Follow the adhesive manufacturer's instructions for mixing and application.
Measure the width and height of your wall. Divide the total width by the wallpaper width (52cm) to get the number of strips needed. Account for the 53cm pattern repeat when calculating the number of rolls. It's always recommended to buy an extra roll to account for any mistakes or future repairs.
While this wallpaper can be used in well-ventilated bathrooms, it is not recommended for very high-moisture environments or directly behind a shower due to its matte paper finish. Ensure good ventilation and consider a wallpaper sealer for added protection.
Most paste-the-paper wallpapers can be removed dry once adhered with a strippable adhesive. Start at a seam and gently peel away. If it's stubborn, a wallpaper steamer or a solution of warm water and adhesive remover can help.
An offset pattern match means that the design on one strip does not perfectly align with the strip next to it at the top or bottom. Instead, you align it at a 'half-drop' point, typically meaning the pattern on the second strip starts halfway through its repeat. This usually requires cutting the second strip at an angle to match the first.
The material is designed for durability. Yellowing is not typically an issue with standard wallpaper if exposed to normal indoor light conditions. Avoid direct, prolonged sunlight which can fade colors over extended periods.
Ensure the wall surface is properly prepared (clean, dry, free from grease) and that the correct adhesive is used and applied evenly to the paper. Check that the adhesive has had adequate time to 'sit' before hanging.
Carefully re-trim edges if necessary. Ensure each strip is aligned precisely with the previous one, paying close attention to the 53cm offset pattern. Use a sharp blade for clean cuts.
Gently lift the edge of the wallpaper strip and re-smooth. For small bubbles, a pinprick can release air, followed by gentle pressing. Ensure you are smoothing from the center outwards.
Handle the paper gently, especially when wet with adhesive. Use a soft brush for smoothing rather than a hard roller that could snag the paper. Ensure paste is applied evenly to avoid weak spots.
Setup:
Compatibility:
This wallpaper is best suited for interior walls in dry, well-ventilated rooms such as living rooms, bedrooms, hallways, and dining areas. It is compatible with most standard wallpaper adhesives designed for paste-the-paper application.
Care:
To clean, gently wipe with a slightly damp cloth. Avoid abrasive cleaners or excessive moisture, as this can damage the matte finish and the paper itself. For stubborn marks, use a very mild soap solution on the cloth and wipe dry immediately.