Autotek Ford Carnival Red Aerosol Spray Paint - 300ml
Best current price£12.99from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£12.99Visit shop Autotek Ford Carnival Red Fast Drying Aerosol Spray Paint 300ml
Visit shopeBay£12.99Visit shop All Offers
4 offers from £12.99 - £13.99
View price history by clicking the chart icon.
eBayAutotek Ford Carnival Red Fast Drying Aerosol Spray Paint 300ml
Free delivery in 1–3 days
£12.99
Visit shop
Autotek Ford Carnival Red Fast Drying Aerosol Spray Paint 300mlFree delivery in 1–3 days£13.99Visit shop →
My Motor WorldAutotek Red Ford Carnival Spray Paint 300Ml
Free delivery in 1–3 days
£12.99
Visit shop
Autotek Red Ford Carnival Spray Paint 300MlFree delivery in 1–3 days£12.99Visit shop →
Product Information
Full details
The Autotek Ford Carnival Red spray paint is designed for classic car enthusiasts and restorers looking to perform precise color-matched touch-ups on Ford vehicles produced between 1974 and 1984. This acrylic-based paint provides a professional-grade finish with exceptional durability on metal, glass fibre, and rigid plastic surfaces, though it requires specific environmental conditions and a primer base to achieve the best possible results.
All features
| Colour | Red |
|---|---|
| Model Part Number | ATOMC299300 |
| Brand | Autotek |
| Container Volume | 300ml |
Extended Product Information
FAQs
Can I use this on non-rigid plastics?
No, this product is formulated specifically for metal, glass fibre, and rigid plastic surfaces.
Do I need to sand the surface first?
Yes, light sanding is recommended to ensure proper adhesion, followed by a thorough cleaning to remove dust and grease.
Is a clear coat required?
While the paint provides a protective finish, applying a high-quality automotive clear coat can enhance depth and provide extra UV protection.
What happens if I spray in temperatures below 15°C?
The paint may not cure properly, leading to a dull finish, longer drying times, or poor adhesion to the surface.
Will this work on newer Ford models?
No, this product is specifically matched for Ford manufacturer paint codes D, EN, and 913 used between 1974 and 1984.
Troubleshooting
Paint is running or sagging during application
You are likely holding the can too close or applying too much paint at once; use thinner coats from a further distance.
Color does not match the original vehicle paint
Ensure you have used a white primer base; the Carnival Red formula is translucent and requires a light base to reflect the correct tone.
Nozzle clogging or inconsistent spray
Check if the can has been shaken for the full 2 minutes, and clean the nozzle with a solvent or turn the can upside down to clear remaining paint after use.
Pros and Cons
Pros
- Precision matching for vintage Ford paint codes
- Suitable for a wide range of automotive surfaces
- Fast-drying properties save time between coats
- Compatible with most standard cellulose and automotive finishes
Cons
- Requires a white primer base for true color accuracy
- Limited temperature application range of 15°C to 25°C
- Not suitable for non-rigid plastic surfaces
Setup, Compatibility & Care
Before starting your project, ensure the target surface is thoroughly cleaned, degreased, and dry. Mask off all surrounding areas to prevent overspray. The aerosol should be shaken vigorously for at least 2 minutes to ensure the paint and propellant are fully mixed. When spraying, maintain a distance of 15-25cm from the surface. Apply the paint in light, sweeping coats rather than one heavy layer to prevent runs or sagging. Wait 10-20 minutes between coats for proper drying. Store the canister in a cool, dry place away from direct sunlight, and always clear the nozzle by turning the can upside down and spraying for a few seconds after use to prevent clogging.