ACF High-Speed Film - Brecantia - 6159
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for users of Brecantia ACF High-Speed Film, optimized for Photon Mono M5s, M5s Pro, M7, and M7 Pro 3D printers. Its key benefit is enabling faster print times and consistent, high-quality results, especially with 12K and 14K resins. A key consideration is that this film is a consumable and requires regular inspection and timely replacement for optimal performance.
All features
| Model Part Number | 6159 |
|---|---|
| Brand | Brecantia |
Extended Product Information
FAQs
How often should I replace the ACF High-Speed Film?
The replacement frequency depends on usage. Inspect the film before each print. Replace it if you notice any scratches, deformation, or if print quality degrades significantly. It's a consumable part.
Can I use this film with printers other than the specified Brecantia models?
This film is specifically optimized and designed for the Brecantia Photon Mono M5s, M5s Pro, M7, and M7 Pro. Using it with other models may lead to suboptimal performance or compatibility issues.
What is the benefit of 95% light transmittance?
High light transmittance means more UV light reaches the resin directly, enabling faster curing and more efficient printing. It also helps in achieving sharper details and reducing the likelihood of under-cured layers.
Is the film difficult to install?
Installation is similar to replacing standard FEP or PFA films. It requires careful handling to ensure it's installed flat and taut. Refer to your specific printer's manual for detailed instructions.
Can I clean the film with Isopropyl Alcohol (IPA)?
Yes, IPA can be used for gentle cleaning. Use a soft, lint-free cloth and wipe carefully to avoid scratching the film's surface. Ensure the film is completely dry before resuming prints.
What are 12K and 14K resins?
These refer to resins formulated for extremely high-resolution 3D printing, offering very fine detail capabilities. ACF High-Speed Film is designed to work efficiently with the specific properties of these advanced resins.
What should I do if the film gets a small puncture?
Even a small puncture can compromise print quality and potentially damage your printer's screen. It is highly recommended to replace the film immediately if any puncture or significant scratch is present.
Troubleshooting
Print adhesion issues or failed prints.
Check the ACF film for scratches or damage. Ensure it is taut and properly installed. Verify that the resin is within its recommended temperature range and that the print settings (exposure times) are correctly calibrated for the resin and printer.
Reduced print speed.
Confirm that the film is clean and free from uncured resin buildup. Ensure compatibility with the resin being used; high-speed films perform best with specific high-resolution, fast-curing resins.
Film appears cloudy or distorted.
This can indicate wear or damage. Inspect closely for micro-scratches or warping. If distortion is present, replace the film immediately to ensure print quality and prevent further issues.
Pros and Cons
Pros
- Significantly faster print speeds compared to standard films.
- Maintains high print quality with fine details.
- Excellent compatibility with Brecantia's high-resolution printers and resins.
- High light transmittance minimizes curing time and maximizes accuracy.
- Cost-effective due to reduced print times over time.
Cons
- It is a consumable part and will require eventual replacement.
- Requires careful handling to avoid premature damage.
- May not offer substantial benefits with lower-resolution resins or older printer models.
Setup, Compatibility & Care
Compatibility: This ACF High-Speed Film is exclusively designed for Brecantia Photon Mono M5s, M5s Pro, M7, and M7 Pro 3D printers. Ensure your printer model matches for optimal performance.
Setup: Replacing the film is typically done during a resin vat maintenance procedure. Ensure the printer is powered off and unplugged. Carefully remove the old film from the resin vat frame, clean the frame, and install the new ACF film according to your printer's specific manual. Avoid overtightening the screws, as this can distort the film.
Care: Regularly inspect the film for any scratches, punctures, or deformations before and after each print. Clean the film gently with a soft, lint-free cloth and a suitable cleaning solution (like Isopropyl Alcohol, IPA) if necessary, being careful not to scratch the surface. Avoid using abrasive materials. Replace the film immediately if any damage is detected to prevent print failures and potential damage to the printer's screen.