Snowdon Timber Hardwood Ply - 18mm x 607mm x 1220mm
Best current price£45.50from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£45.50Visit shop B&Q - Hardwood Plywood (T) 18mm (W) 607mm (L) 1220mm
Visit shopB&Q£45.50Visit shop One Offer
1 offer from £45.50
View price history by clicking the chart icon.
Product Information
Full details
The Snowdon Timber Hardwood Ply is an ideal choice for professional joiners and DIY enthusiasts who require a reliable, high-strength substrate for furniture and interior construction. It offers superior stability and a smooth, consistent surface perfect for painting, staining, or veneering, though it is specifically intended for internal use and should be protected from moisture to prevent warping or delamination.
All features
| Brand | Snowdon Timber |
|---|
Extended Product Information
FAQs
Is this plywood suitable for outdoor decking?
No, this product is designed strictly for indoor use and will degrade if exposed to weather or standing water.
Can I paint this plywood directly?
While the surface is smooth, applying a quality wood primer before painting will provide the best finish and durability.
What is the best way to cut this board?
A circular saw or a jigsaw with a fine-tooth blade works best for clean, straight cuts.
Does this ply contain formaldehydes?
Like most engineered wood products, it is manufactured using adhesives that comply with standard safety regulations. Always work in a well-ventilated area when sanding or cutting.
Can I use this for a heavy-duty workbench?
Yes, its 18mm thickness provides excellent strength, though you may want to double-up or laminate the top for extreme loads.
Troubleshooting
Surface splintering during cutting
Use a fine-tooth blade or apply masking tape along the cut line before sawing to maintain a clean edge.
Screws are pulling through or not holding
Ensure you are using the correct screw length and always drill a pilot hole slightly smaller than the screw shank.
Board warping or bowing
Check that the board is stored flat in a dry, temperate area. If installed, ensure it is properly braced or fixed to a frame.
Pros and Cons
Pros
- Excellent structural stability for load-bearing furniture
- Pre-cut manageable size ideal for smaller projects
- Smooth finish reduces preparation time before painting or staining
- Highly compatible with standard woodworking adhesives and fasteners
Cons
- Not suitable for outdoor or high-moisture environments
- Limited width (607mm) may require joining for larger table surfaces
- Edges require sealing to prevent moisture absorption
Setup, Compatibility & Care
Before starting your project, ensure the ply is acclimated to the room's temperature for at least 24 hours to minimize expansion or contraction. Use fine-toothed saw blades for cutting to ensure smooth edges and prevent splintering of the surface veneer. When assembling, always pre-drill pilot holes to avoid splitting the material. To maintain the board, ensure it is sealed with a primer, paint, or varnish, particularly on the exposed edges where moisture entry is most likely. Clean dust off regularly with a dry cloth and avoid using harsh chemicals that could damage the surface finish.