Inta Pushfit Stem Elbow Pair - 15mm X 10mm

It uses a mechanical grip and an O-ring seal system, allowing you to simply push the pipe into the fitting to create a secure, leak-free connection without soldering or compression tools.

Yes, provided the existing pipework is compatible (e.g., copper, PEX) and in good condition. Ensure pipe ends are prepared correctly.

The integrated stem design eliminates the need for a separate rising spindle and packing gland, which are common sources of leaks and require maintenance in traditional fittings.

These fittings are designed for long-term durability and reliability in standard plumbing applications, typically lasting many years when installed correctly.

For installation, only a pipe cutter and possibly a deburring tool are needed. A specific removal tool is recommended if you need to disconnect the pipe later.

Consult the manufacturer's specifications for precise temperature and pressure ratings, but they are generally designed for standard domestic hot and cold water systems.

Ensure the pipe was cut square and is free of burrs. Verify the pipe was pushed in fully to the correct depth. Check for any debris inside the fitting or on the pipe.

Check if the pipe is deformed or if there are internal obstructions. Ensure the correct pipe size is being used for the fitting.

Use the designated removal tool or follow the manufacturer's instructions for releasing the pipe grip. Ensure the release ring is fully depressed.