Best current price£9.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.99Visit shop - Y30Bh Ferrite Magnet For ArtsCraftsModel MakingDiyHobbiesOfficeAnd Home75mm X 50mm X 20mm Thick5Kg Pull
Visit shop2 offers from £9.99 - £11.79
View price history by clicking the chart icon.
The FIRST4MAGNETS Ferrite Magnet is ideal for DIY enthusiasts, hobbyists, and industrial engineers requiring a durable, high-temperature magnetic solution. It offers a robust 5kg pull strength and exceptional resistance to corrosion and demagnetisation, making it perfect for demanding environments. While it provides excellent value and versatility, users should note that its rigid ceramic composition makes it brittle and susceptible to cracking if dropped or subjected to high-impact stress.
| Brand | FIRST4MAGNETS |
|---|
Yes, because ferrite magnets are corrosion-resistant, they perform well in outdoor environments without rusting.
No, you should not attempt to drill into ferrite magnets. They are brittle and will shatter or crack during the drilling process.
It is rated for continuous use at temperatures up to 180 degrees Celsius.
Yes, the poles are located on the two opposite 75mm x 50mm rectangular faces.
The most effective method is using a strong structural adhesive, such as a two-part epoxy or a high-strength construction adhesive.
Strong magnets should be kept away from sensitive electronics, magnetic storage media, and medical devices like pacemakers.
Ensure the magnet is in flush, direct contact with bare mild steel. Any gaps, paint, or debris will drastically reduce pull strength.
If the crack is superficial, the magnetic performance is usually unaffected. Use a non-conductive epoxy to seal the chip and prevent further crumbling.
Slide the magnet to the edge of the steel surface rather than pulling directly away; this 'peel' motion requires significantly less force.
To install, use a high-strength epoxy or mechanical clamp, as these magnets do not come with pre-drilled holes. When positioning, ensure the face with the correct polarity is oriented toward your target surface. Because ferrite is a ceramic material, avoid dropping the magnet onto hard surfaces or hitting it with metallic tools to prevent chipping. To clean, simply wipe with a dry or slightly damp cloth; the material does not require oil or specialized anti-rust treatments to maintain its integrity. When storing multiple magnets, use non-magnetic spacers between them to prevent them from snapping together, which could cause structural damage to the brittle material.
