Setup, Compatibility & Care
Setup:
- Ensure the engine is cool before starting.
- Safely lift and support the vehicle to access the oil filter.
- Place a drain pan underneath the oil filter to catch any residual oil.
- Use an appropriate oil filter wrench to loosen and remove the old filter.
- Clean the filter mounting surface on the engine.
- Lightly lubricate the rubber gasket on the new Mahle OC297 filter with fresh engine oil.
- Screw the new filter on by hand until the gasket makes contact with the mounting surface.
- Tighten the filter an additional 3/4 to 1 full turn by hand, or to the manufacturer's recommended torque specification (typically around 25 Nm). Do not overtighten.
- Lower the vehicle and refill the engine with the correct type and amount of oil.
- Start the engine and check for leaks around the filter. Allow the engine to run for a few minutes and re-check the oil level, topping up if necessary.
Compatibility:
It is essential to verify that the Mahle OC297 oil filter is compatible with your specific Mitsubishi Pajero or Shogun model and year. Use the provided vehicle compatibility tool or consult your vehicle's owner's manual. This filter is designed for specific engine applications and cross-references include ACDelco X4242E and Mahle part number ME013307.
Care:
Oil filters are designed for single use and should be replaced at recommended service intervals, typically every 5,000 to 7,500 miles or as specified in your vehicle's maintenance schedule. Proper disposal of used oil filters is also important; many auto parts stores offer recycling programs.