SLX Twist On F-Type Connector - Pack Of 10
Best current price£5.50from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£5.50Visit shop B&Q - Twist On F-Type F ConnectorPack Of 10
Visit shopB&Q£5.50Visit shop One Offer
1 offer from £5.50
View price history by clicking the chart icon.
Product Information
Full details
The SLx Twist On F-Type Connector is designed for DIY enthusiasts and professionals seeking a straightforward, tool-free method to terminate 6.35mm RG-6 coaxial cable for satellite or terrestrial aerial systems. This pack provides ten durable male connectors, offering a reliable and secure physical connection for your signal transmission needs, though users should ensure they are using standard RG-6 cabling to avoid connectivity issues caused by mismatched wire diameters.
All features
| Brand | SLX |
|---|
Extended Product Information
FAQs
Can I use these for outdoor connections?
While functional, they lack the rubber seals found in compression connectors. If used outdoors, apply self-amalgamating tape to seal the connection from moisture.
Do I need a special tool to install these?
No, these are designed to be installed by hand, though a pair of pliers can help provide extra leverage when twisting.
Will these work with RG-59 cable?
No, these are strictly for 6.35mm RG-6 coaxial cable. RG-59 is thinner and will result in a loose, unreliable connection.
Are these connectors reusable?
Yes, you can unscrew them from the cable and reuse them if they haven't been damaged during initial installation.
What should I do if the center wire is too long?
Trim the center conductor wire using side cutters so that it extends only about 2-3mm past the end of the connector threads.
Troubleshooting
Weak or no signal detected
Check that the center conductor is long enough to protrude into the device port and that no stray braid strands are touching the center pin.
Connector feels loose
Ensure you are using standard 6.35mm RG-6 cable; if using a thinner cable, the connector will not grip the jacket correctly.
Difficulty twisting onto cable
Apply a small amount of pressure while rotating, and ensure the outer braid is folded evenly to prevent bunching.
Pros and Cons
Pros
- Tool-free installation requires no expensive crimping equipment
- Easy to remove and reuse if cable length adjustments are needed
- Provides a secure mechanical connection for standard RG-6 cables
- Cost-effective multipack format
Cons
- Not as weather-resistant as professional compression connectors
- Requires precise cable stripping to ensure proper contact
- Not compatible with thicker or thinner coaxial cable types (e.g., RG-59)
- Can be susceptible to signal degradation if improperly twisted on
Setup, Compatibility & Care
To install these connectors, first strip your 6.35mm RG-6 coaxial cable, removing approximately 10mm of the outer sheath and 5mm of the foil/braided shield to expose the inner dielectric and copper core. Fold the remaining outer braiding back over the sheath. Push the connector firmly onto the cable and twist it clockwise until it feels tight and secure against the cable jacket. These connectors are designed specifically for 6.35mm RG-6 cabling and should not be forced onto different cable gauges. Keep the connectors in a dry environment and ensure they are tightened fully to the equipment port to prevent oxidation or loose connections over time.