Hycote Touch Up Spray Paint - BMW Alpine White - 150ml

Best current price£6.99from My Motor World
Best offers
Shopping.co.uk recommended and popular offers
Hycote White Bmw Alpine Iii Double Acrylic Spray Paint 150Ml
Visit shop
Best current price£6.99from My Motor World
Shopping.co.uk recommended and popular offers
Hycote White Bmw Alpine Iii Double Acrylic Spray Paint 150Ml
Visit shop10 offers from £6.99 - £50.99
View price history by clicking the chart icon.
This guide is for anyone looking to touch up their BMW Alpine White vehicle with Hycote Double Acrylic Spray Paint. The key benefit is achieving a colour-matched, durable finish, covering scratches and minor imperfections. A caveat is that achieving a perfect, undetectable match requires proper surface preparation and application techniques.
| Model Part Number | HYCXDBM601 |
|---|---|
| Brand | Hycote |
Drying times vary depending on temperature and humidity. Refer to the can for specific drying times, usually between 10-30 minutes for touch dry.
Yes, this paint is suitable for use on plastics, as well as metals, wood, and ceramics.
It's generally recommended to use a primer, especially on bare metal or plastic surfaces, to improve adhesion and provide a better finish. Check for primer compatibility with the paint.
Apply thin, even coats until the damage is covered. Typically, 2-3 coats are sufficient, but this may vary depending on the extent of the damage.
Use a clear coat that is compatible with acrylic paints. Follow the clear coat manufacturer's instructions.
The can contains 150ml of paint.
The paint code is usually located on a sticker inside the driver's side door or in the engine bay.
Apply thinner coats and ensure you're holding the can the correct distance from the surface.
Ensure proper surface preparation. Apply multiple thin coats, allowing each to dry fully. Consider a clear coat application.
Clean the nozzle after each use. Turn the can upside down and spray until only propellant comes out.
Ensure the surface is properly cleaned and degreased. Lightly sand the area to provide a better surface for adhesion.