Best current price£125.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£125.00Visit shop B&Q - Snatch Block Swivel Hook 8T 8" (Lifting Pulley 8 Ton 8 Inch Lightweight)
Visit shop2 offers from £125.00
View price history by clicking the chart icon.
The SecureFix Direct 8-Tonne Snatch Block with Swivel Safety Hook is designed for professionals in lifting, pulling, towing, and redirecting operations using wire rope. Its key benefit is the roller bearing sheave for high-speed applications and the convenient gate for easy wire insertion. A minor caveat is that it is specifically designed for wire rope within a certain diameter range.
| Brand | SecureFix Direct |
|---|
This snatch block is designed to suit wire rope diameters between 20MM and 22MM.
The snatch block has a head load capacity of 8 Tonnes.
Yes, a test certificate is included and will be sent to you via email.
The roller bearing sheave reduces friction, allowing for smoother operation and higher efficiency, especially in high-speed applications.
The gate allows you to open a part of the block's frame to slide the wire rope onto the sheave, rather than having to thread the entire rope through an opening.
It is highly suitable for lifting, pulling, towing, and redirecting operations specifically using wire rope within its specified diameter range and load capacity.
It conforms to BS EN 13157: 2004 + A1: 2009 safety standards.
Check for debris or obstructions around the sheave and bearing. Ensure the wire rope is correctly seated and not binding. If the issue persists, inspect the bearing for damage or lack of lubrication.
Inspect the gate mechanism for any damage or misalignment. Ensure no debris is preventing a full closure. If the gate is bent or damaged, the block should be taken out of service.
Clean the swivel mechanism and check for obstructions. Apply a suitable lubricant to the swivel point.
This may indicate wear on the sheave or roller bearings. Inspect for damage and consider replacement if excessive noise persists under load.
Setup: To use the snatch block, open the gate mechanism on the side of the block. Thread the wire rope through the sheave. Ensure the gate is securely closed after the rope is in place. Attach the swivel safety hook to the anchor point or the load using appropriate rigging procedures.
Compatibility: This snatch block is designed for use with wire rope diameters between 20MM and 22MM. It is compatible with loads up to 8 Tonnes. Always ensure that the wire rope and attachment points meet or exceed the load rating of the snatch block.
Care: Regularly inspect the snatch block for any signs of wear, damage, or deformation. Clean the sheave and bearing area to remove any dirt or debris that could impede performance. Lubricate the bearing as per manufacturer recommendations (if applicable, consult specific documentation). Store the block in a dry environment when not in use to prevent corrosion. Ensure the safety latch on the hook is functional.
