Sika Dustproofer - Clear - 5L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for anyone looking to protect and improve the lifespan of concrete floors, particularly in garages, workshops, and industrial settings. Sika Dustproofer provides a hardened, sealed surface that resists water and wear, effectively eliminating dust. However, it's crucial to apply it correctly for optimal performance, ensuring proper surface preparation is done beforehand.
All features
| Colour | White |
|---|---|
| Model Part Number | 102470 |
| Brand | Sika |
Extended Product Information
FAQs
How much area does a 5L container cover?
Coverage varies depending on the porosity of the concrete. Check the product label for specific coverage rates.
Can I apply this to painted concrete?
No. The old paint must be removed for the product to be effective.
What is the drying time?
Drying time depends on environmental conditions, but typically takes several hours. Check the product label for specific instructions.
Is Sika Dustproofer suitable for exterior use?
Yes, it can be used on exterior concrete surfaces like driveways and paths.
How do I clean up spills?
Wipe up spills immediately with a clean cloth.
Does this product change the colour of the concrete?
Sika Dustproofer dries clear and should not significantly alter the appearance of the concrete.
Troubleshooting
Surface is still dusty after application.
Ensure thorough surface preparation before application. Reapply a second coat if needed, making sure the first coat is completely dry.
Product is not drying properly.
Ensure adequate ventilation and proper temperature conditions. Avoid applying in high humidity conditions. Ensure proper application with no puddling.
Uneven finish.
Apply the dustproofer evenly and avoid excessive buildup. Ensure consistent application across the surface and consider using a sprayer for a more uniform coating.
Pros and Cons
Pros
- Significantly reduces concrete dust, improving air quality.
- Hardens the concrete surface, increasing wear resistance.
- Improves water resistance, protecting against spills and moisture.
- Easy to apply, requiring no special equipment.
- Suitable for a wide range of applications, including garages and workshops.
Cons
- Requires proper surface preparation for optimal results.
- May not be suitable for heavily damaged or severely deteriorated concrete.
- Results may vary depending on the concrete's condition.
- Additional coats might be needed for very porous concrete.
Setup, Compatibility & Care
- Surface Preparation: Ensure the concrete surface is clean, dry, and free from loose particles, oil, grease, and existing coatings. Clean the surface thoroughly before application.
- Application: Apply Sika Dustproofer evenly using a brush, roller, or sprayer. Avoid puddling.
- Drying Time: Allow the dustproofer to dry completely. Drying times can vary depending on environmental conditions (typically several hours). Refer to the product label for specific recommendations.
- Compatibility: Sika Dustproofer is compatible with most concrete surfaces. Avoid application on surfaces treated with other sealers or coatings unless fully removed.
- Care: Once dry, the treated surface can be cleaned with water and mild detergents. Avoid abrasive cleaners.