Kenable Speaker Cable - 3M
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 3-meter Kenable speaker cable is designed for securely connecting mono speaker systems, ideal for guitar amp heads, cabinets, and other speakers requiring a 6.35mm (1/4 inch) mono connection. Its key benefit is reliable, low-impedance power handling crucial for speaker output, differentiating it from instrument cables. A potential caveat is its suitability for light-duty use, rather than high-power, demanding professional setups.
All features
| Model Part Number | 11065 |
|---|---|
| Brand | kenable |
Extended Product Information
FAQs
Can I use this cable to connect my guitar to my amplifier?
No, this is a speaker cable designed for high power, low impedance connections between an amplifier and a speaker. Using it as an instrument cable (guitar to amplifier) can damage your equipment due to the impedance mismatch.
What is the difference between a speaker cable and an instrument cable?
Speaker cables handle high power with low impedance to carry amplified sound from the amplifier to the speaker. Instrument cables handle low power with high impedance to carry the raw signal from an instrument to the amplifier's input.
Is this cable suitable for professional touring setups?
This cable is ideal for light-duty use, such as practice or smaller gigs. For demanding professional touring, heavier-duty cables with more robust construction might be recommended.
What does 'mono connection' mean for this cable?
It means the cable is designed for a single audio channel connection, typically used for linking a single amplifier output to a single speaker input. It is not designed for stereo applications.
How should I clean the connectors?
Use a dry, lint-free cloth to wipe down the metal connectors. Ensure they are free of dust or debris before plugging them into your equipment.
What is the length of this specific cable?
This specific product is a 3-meter (approximately 9.8 feet) speaker cable.
Troubleshooting
No sound or intermittent sound
Ensure both ends of the cable are securely plugged into the correct 'Speaker Output' and 'Speaker Input' sockets. Check that the amplifier and speaker are functioning independently. Verify that the cable is not damaged; try a different known-working speaker cable to isolate the issue.
Distorted sound or poor audio quality
Confirm you are using a speaker cable and not an instrument cable. Check that the cable is fully inserted into the jacks. Inspect the cable for any visible damage, kinks, or cuts. Ensure the cable is suitable for the power output of your amplifier; this cable is for light-duty use.
Crackling noise from speaker
This often indicates a poor connection. Reseat both plugs firmly. Clean the metal connectors on both the cable and the equipment sockets with a dry, lint-free cloth. If the issue persists, the cable may be faulty.
Pros and Cons
Pros
- Provides a secure mono connection for speakers.
- Handles high power with low impedance, essential for speaker outputs.
- Features durable metal connectors for reliable contact.
- Suitable for light-duty applications like practice amps or smaller PA systems.
Cons
- Not suitable for instrument signals due to impedance differences.
- Recommended for light-duty use; may not be robust enough for heavy professional touring.
- Limited to mono connections only.
- Three-meter length might be too short for some stage or studio configurations.
Setup, Compatibility & Care
Setup: To set up the Kenable speaker cable, ensure both your amplifier or amplifier head and your speaker cabinet are powered off. Firmly insert one 6.35mm (1/4 inch) mono jack plug into the designated 'Speaker Output' on your amplifier and the other plug into the 'Speaker Input' on your cabinet. Ensure both connections are snug. Once connected, you can power on your equipment.
Compatibility: This cable is designed for mono speaker connections. It is compatible with any amplifier head or speaker cabinet featuring 6.35mm (1/4 inch) mono jack sockets specifically labeled for speaker connections. Important: Do not confuse this with an instrument cable, which uses the same connector size but is designed for high impedance and low power signals (e.g., connecting a guitar to an amplifier).
Care: Keep the cable and connectors clean and free from dust and debris. Store the cable loosely coiled rather than tightly wound to prevent internal wire damage. Avoid excessive pulling on the cable itself; always pull by the connector when disconnecting. Periodically check the connectors for damage or corrosion and clean with a dry cloth if necessary.