Rosfix Turbodysza Rotacyjna do Myjki Karcher HD HDS - QRD5-01H9F
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Rosfix Turbodysza Rotacyjna (QRD5-01H9F) is a specialized accessory designed for professionals using Karcher HD and HDS series pressure washers that rely on traditional M18x1.5 threaded connections. Its primary benefit is a 50% increase in cleaning impact through a concentrated, rotating stream, making it ideal for stripping stubborn materials like rust or old paint. Potential users should note that this model is specifically engineered for systems without the Easy Lock quick-coupling standard, requiring verification of your machine's connection type before purchase.
All features
| Model Part Number | QRD5-01H9F |
|---|---|
| Brand | Rosfix |
Extended Product Information
FAQs
Does this work with Easy Lock systems?
No, this model is designed for standard M18x1.5 threaded connections. An adapter is required for Easy Lock systems.
Can I use this for cleaning my car?
The rotating stream is very aggressive and may damage automotive paint; it is recommended for heavy-duty cleaning on stone, concrete, or metal surfaces only.
What happens if the ceramic insert chips?
If the ceramic insert chips, the nozzle will lose its rotating pattern and must be replaced to prevent damage to the lance or inconsistent spray.
What is the maximum temperature this nozzle can handle?
The nozzle is rated for water temperatures up to 100°C.
How do I know if this nozzle size (060) is correct for my washer?
Verify your pressure washer's 'nozzle size' requirement in the manual. Using a nozzle that is too large or too small will significantly impact the machine's performance.
Troubleshooting
The nozzle does not rotate correctly
Debris may be caught inside the nozzle. Try flushing it with clean water or using a thin wire to gently clear the internal ceramic chamber.
Water leaks at the connection point
Ensure the M18x1.5 threads are not damaged and check that the seal is properly seated. You may need to use a small amount of Teflon tape if the thread fit is loose.
Pressure drop during operation
Check the nozzle size (060) against your machine's specifications; if the nozzle size is too large for your pump, pressure will not build properly.
Pros and Cons
Pros
- Significantly faster cleaning of stubborn surfaces like rust and paint
- Durable ceramic internal construction extends component life
- Compatible with hot water (up to 100°C) for deep cleaning
- Reduces the consumption of water and chemical cleaning agents
- High pressure threshold of 276 bar for heavy-duty tasks
Cons
- Not compatible with Karcher Easy Lock systems without an adapter
- Requires careful handling on delicate surfaces due to high impact force
- Specific to M18x1.5 threading only
Setup, Compatibility & Care
To install, simply unscrew your existing nozzle from the pressure washer lance and screw the Rosfix Turbodysza onto the M18x1.5 thread. Ensure the connection is hand-tightened securely to prevent pressure drops.
Compatibility Note: This product is intended for standard threaded Karcher HD/HDS lances. If your machine uses the newer 'Easy Lock' yellow-colored quick-connect system, you will need a separate threaded adapter to use this nozzle.
Care Instructions: After use, rinse the nozzle with clean water to remove any residual chemicals. Store in a dry place to prevent mineral buildup inside the ceramic insert. If the rotation stops, check for debris or sand particles trapped in the nozzle aperture.