Cellfast 3-Way Splitter 1" To Standard - Grey

The two standard outlets are designed for a 26mm quick connection diameter, which is typical for Hozelock compatible fittings.

This splitter is primarily designed for a 1" heavy-duty hose connection. You may need a specific adapter to connect it to a standard 3/4" hose inlet, depending on the adapter type.

While splitting flow naturally divides pressure, the heavy-duty 1-inch inlet is designed to maintain good flow. Significant pressure loss would more likely be due to the limitations of the connected devices (e.g., sprinklers) or the main water supply itself.

It is designed for heavy-duty hose connections and can handle moderate to high water pressure from a garden tap. For specific high-pressure washer requirements, always check the compatibility with your pressure washer's inlet specifications.

The splitter is constructed from durable materials designed for outdoor use, providing resistance to weather conditions. However, like all plastic components, it should be protected from extreme conditions and physical impact.

No, this is a 3-way splitter that connects one inlet to two outlets. It allows you to split one line into two separate lines.

Ensure the 1-inch hose is fully and securely pushed onto the splitter's inlet. Check the washer/seal on the hose connection for damage and replace if necessary.

Verify that the standard hoses are properly clicked into the 26mm quick-fit connectors. Ensure the hose ends and splitter ports are clean and free of debris. Check the seals on the standard hoses.

Check the main water supply for adequate pressure. Ensure no kinks are present in either the main hose or the connected hoses. Clear any potential blockages within the splitter's internal channels or connected hoses.

This is normal as flow is influenced by the resistance of connected devices (sprinklers, etc.). Ensure both connected hoses are functioning correctly and that the primary water source provides sufficient flow.