Best current price£25.33from eBay
Shopping.co.uk recommended and popular offers
eBay£25.33Visit shop US PRO Tools 88PC Thread installation and repair kit helicoil set M6, M8, M10
Visit shop3 offers from £25.33
View price history by clicking the chart icon.
This guide is for anyone needing to restore damaged threads in automotive and engine repair applications. The US PRO Tools 88-piece thread installation and repair kit offers a simple and easy-to-use solution for damaged threads in steel, cast iron, and aluminum. Keep in mind that while this kit is comprehensive, it is designed for specific thread sizes: M6 x 1.0, M8 x 1.25, and M10 x 1.5.
| Model Part Number | 2699 |
|---|---|
| Brand | us pro |
This kit works with M6 x 1.0, M8 x 1.25, and M10 x 1.5 thread sizes.
This kit is suitable for use on steel, cast iron, and aluminum.
While not strictly required, some prior mechanical knowledge is helpful. Always read and follow the instructions provided.
Using the wrong size drill bit can damage the threads and make the repair impossible. Always use the drill bit size specified in the kit's instructions.
No, this kit is designed for use on steel, cast iron, and aluminum, not plastic materials.
If the tap breaks, you may need to use a tap extractor tool to remove the broken tap. Proceed with caution to avoid further damage.
Make sure the insert is flush with the surface or slightly below. Over-tightening can damage the threads.
Ensure the tapped hole is clean and the correct tap was used. Check for burrs or obstructions.
Remove the insert and start the process again, ensuring the tap is straight and aligned.
Make sure you are using the correct tool and apply firm, steady pressure. If the tang is stubborn, use a small pick to gently remove it.
This kit is specifically designed for use with M6 x 1.0, M8 x 1.25, and M10 x 1.5 threads. Ensure compatibility by verifying the thread size before starting.
*Care*: Always clean the tools after use. Store the kit in a dry place to prevent corrosion. Ensure proper lubrication when tapping threads. Read the included instructions before use.
