Q-Connect Toner Cartridge - Yellow

This cartridge has a standard yield of up to 1,000 pages, based on a 5% coverage rate.

No, this is a compatible substitute toner cartridge manufactured by Q-Connect, designed to work with Brother printers.

It is compatible with DCP-L3510CDW, DCP-L3550CDW, HL-L3210CW, HL-L3230CDW, HL-L3270CDW, MFC-L3710CW, MFC-L3730CDN, MFC-L3750CDW, and MFC-L3770CDW models.

After turning off the printer, open the toner compartment, remove the old cartridge, insert the new one until it clicks, close the compartment, and turn the printer back on. Refer to the 'Setup' section for detailed steps.

While generally possible, it is best practice to use cartridges of the same type (either all compatible or all original) for optimal and consistent print results. Mixing may sometimes lead to minor variations in output.

Compatible cartridges might report toner levels differently than original ones. You can typically continue printing until the print quality visibly declines. If the message appears immediately, ensure the cartridge is correctly installed.

Please refer to the retailer's or Q-Connect's official warranty information for details on coverage for this product.

Ensure the toner cartridge is properly seated. Gently shake the cartridge horizontally a few times to redistribute toner. Check printer settings for optimal quality. Run a printer cleaning cycle if available.

Remove and reinsert the cartridge, ensuring it clicks into place. Verify that the cartridge model is correct for your printer. Check for any protective seals that may have been missed during installation.

Confirm that the correct Yellow cartridge is installed. Run a printer head cleaning or color calibration utility through your printer's software. Ensure the printer is set to print in color mode.

Compatible cartridges may have slightly different toner level sensors. Continue printing until print quality degrades significantly. If the message appears immediately after installation, re-seat the cartridge.