Best current price£109.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£109.00Visit shop B&Q - Bray Electric Heated Towel RailPrefilledStraightWhiteW500 X H1200 mm
Visit shop1 offer from £109.00
View price history by clicking the chart icon.
The BRAY Electric Heated Towel Rail is designed for homeowners seeking a reliable and durable heating solution for bathrooms or kitchens. Its primary benefit is its robust 1.5mm thick steel construction and pre-filled, sealed design, which ensures superior leak and rust resistance compared to standard models. While the unit offers exceptional quality and energy efficiency, users should note that the installation requires a hardwired electrical connection rather than a simple plug-in, necessitating professional assistance for safety.
| Colour | White |
|---|---|
| Model Part Number | SW512P |
| Brand | B&Q |
No, the BRAY rail is designed for a permanent, hardwired electrical connection via a fused spur.
Due to the electrical nature of the installation, it is recommended to use a qualified electrician.
Yes, the unit arrives pre-filled and factory-sealed, so no additional fluid or filling is required.
The IP67 rating means the heating element is fully protected against dust and protected from the effects of water immersion, making it safe for use in bathroom zones.
The rail is designed as a towel warmer and comfort heater; it may not provide enough heat to be the sole heating source for large, cold bathrooms.
Control is typically handled via the fused spur switch or an external thermostat/timer installed by your electrician.
Check the fused spur to ensure it is switched on and that the fuse has not blown.
Ensure the rail is mounted perfectly level and check for any physical obstructions blocking the airflow around the bars.
Use a damp, non-abrasive cloth to gently wipe the area; avoid chemical cleaners that may strip the finish.
Installation of the BRAY rail involves hardwiring into a fused spur. We highly recommend hiring a qualified electrician to ensure all local wiring regulations are met. The unit must be securely mounted to a wall capable of supporting its weight; ensure you use appropriate wall anchors for your specific wall type (e.g., masonry or stud).
Maintenance is minimal due to the factory-sealed system. To clean, simply wipe the surface with a soft, damp cloth and a mild soap solution. Avoid using abrasive sponges or harsh chemical cleaners, as these can damage the white finish. Periodically inspect the wall brackets to ensure they remain tight and secure.
