Best current price£339.00from alanwadkinstoolstore.co.uk
Shopping.co.uk recommended and popular offers
alanwadkinstoolstore.co.uk£339.00Visit shop Makita SG1251J 125mm Wall Chaser 110v Option: 110V
Visit shop
B&Q£352.99Visit shop B&Q - Sg1251J 240V Corded Wall Chaser 125mm 2 X Diamond Discs Makpac Case
Visit shop12 offers from £339.00 - £469.46
View price history by clicking the chart icon.
This guide is for professionals and DIY enthusiasts looking to efficiently create clean channels in walls for wiring or pipes using the Makita SG1251J/2 wall chaser. The primary benefit is its ability to make precise, clean cuts with minimal dust. However, users should be aware of the 1400W power requirement and the need for appropriate safety gear. This guide covers key features, practical usage, setup, maintenance, and troubleshooting to help you get the most out of your Makita wall chaser.
| Model Part Number | SG1251J |
|---|---|
| Brand | Makita |
The SG1251J uses 125mm diameter blades.
The maximum cutting depth is 30mm.
No, the dust extractor is sold separately, but the tool is designed to connect to one.
Always wear eye protection and a dust mask. Use appropriate work gloves. Ensure the work area is well-ventilated.
The cutting width can be adjusted using the appropriate controls on the tool; refer to the user manual for specific instructions.
The Super Joint System (SJS) is a mechanism designed to protect the motor from burnout by absorbing vibration and reducing the impact on the motor.
Blade replacement frequency depends on usage and the materials being cut. Inspect the blades regularly for wear and tear, and replace them when they become dull or damaged.
Check the power supply and ensure the power cord is securely connected. Check the fuse or circuit breaker.
Ensure the blades are sharp and correctly installed. Adjust the cutting depth and width settings as needed. Check for any obstructions.
Verify the dust extraction system is properly connected and functioning. Check for any clogs in the dust extraction hose or the tool's dust port.
Allow the motor to cool down. Check for overloading and reduce the cutting depth if necessary. The SJS system may have been triggered to prevent motor burnout.
