JCP CONSTRUCTION PRODUCTS Spring Toggles with Screws - Gold - Box of 100

These toggles are specifically designed for hollow walls, such as plasterboard, drywall, and composite panels. They are not suitable for solid walls like brick or concrete.

The maximum weight capacity depends on the wall material's thickness and integrity. Always check the product packaging or manufacturer's specifications for load ratings, but generally, they provide heavy-duty anchoring for common household items.

You will need a drill to create the pilot hole (typically 14mm for M5 toggles) and a screwdriver to insert the screw.

Yes, each box of JCP Fixings Spring Toggles comes complete with matching screws for straightforward installation.

While technically possible, it's generally recommended to use a new toggle if removing and re-installing, as the initial expansion might slightly damage the wall hole or the toggle itself, compromising its holding power on subsequent uses.

M5 refers to the screw thread size. 14mm is the recommended drill hole diameter, and 45mm is the approximate length of the toggle, indicating the depth it can effectively anchor within the wall cavity.

Ensure the hole drilled is the correct size. If too small, the toggle may not collapse fully. If too large, it may not catch. Re-drilling to the correct M5/14mm diameter may be necessary.

The toggle may not be fully seated, or the wall material may be too thin. Ensure the toggle's arms have fully opened and are pressing against the back surface. Try a toggle with longer arms if the wall material is very thin.

This can happen if the wall material is weak or if the weight load exceeds the toggle's capacity. Ensure the toggle is rated for the weight of the item being hung and that it is installed in appropriate hollow wall material.