Best current price£3.10from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£3.10Visit shop WAGO 284-684 10mm 3-conductor Through Terminal Block Blue AWG 24-8
Visit shop2 offers from £3.10 - £5.94
View price history by clicking the chart icon.
The WAGO 284-684 is a high-performance 3-conductor through terminal block engineered for professionals and DIY enthusiasts requiring robust electrical termination for wire sizes between 24 and 8 AWG. Its primary benefit is the integration of proprietary spring clamp technology, which ensures maintenance-free, vibration-resistant connections, though users should note that these blocks require specific 35mm DIN rail infrastructure to function effectively.
| Model Part Number | 284-684 |
|---|---|
| Brand | WAGO |
Yes, WAGO spring clamp terminals are compatible with both solid and stranded wires.
The terminal block is rated for a nominal current of 57A.
Yes, the spring clamp technology allows for wires to be removed and reinserted multiple times without losing tension.
A standard flat-blade screwdriver that fits the actuator opening is sufficient to operate the spring clamp.
The unit supports a nominal voltage of 800V.
Each pack contains 25 individual terminal blocks.
Verify that the wire gauge is within the 24-8 AWG range and that the conductor has been stripped to the correct length.
Ensure the rail is a standard 35mm width and use end-stop clamps to secure the terminal blocks in place.
To set up the WAGO 284-684, begin by securing a standard 35mm DIN rail into your enclosure. Simply snap the terminal block onto the rail until it locks firmly into place. To connect wires, strip the insulation to the manufacturer-recommended length, insert the wire into the clamp opening—typically using a screwdriver to depress the spring—and release to secure the connection. Ensure all wires are fully seated to maintain the 57A rating. For care, keep the units free of dust and debris. Because these are spring-loaded, no periodic retightening is required, unlike traditional screw terminals, though an annual visual inspection is recommended to ensure no environmental damage or moisture exposure has occurred.
