Minerva Core Range Velvet Touch Satin Fabric Red

Yes, it is recommended to pre-wash the fabric according to the care instructions (30 degrees Celsius) if the finished item will be washed. This helps to pre-shrink the fabric and test its behavior.

This fabric is ideal for creating elegant clothing like dresses, skirts, blouses, formal wear, lingerie, and linings. It's also excellent for accessories such as scarves, bags, and home decor items like cushions or decorative throws.

The fabric is sold by the meter and cut from the roll as one continuous piece, regardless of the quantity ordered.

The fabric has a weight of 105 gsm (grams per square meter), classifying it as a lightweight fabric.

You can machine wash it at 30 degrees, tumble dry on low, and iron on a medium setting. Avoid bleach and dry cleaning.

While beautiful, satin can be challenging for absolute beginners due to its slippery nature. However, with careful handling, a sharp needle, and proper machine settings, beginners can achieve excellent results, especially for simpler projects.

The fabric has a width of approximately 150cm, which is equivalent to 60 inches.

Use a rotary cutter and mat for precision, or place a thin layer of tissue paper underneath the fabric while cutting to provide extra grip. Ensure your cutting surface is stable.

Use a new, fine microtex or sharp needle (size 70/10 or 80/12). Check your machine's tension settings; a slightly lower tension on the top thread might be necessary. Ensure you are using good quality polyester thread.

Reduce the upper thread tension slightly and ensure you are using the correct needle size. Sew at a consistent, moderate speed. Consider using a walking foot for better fabric feed if available.

Ensure the fabric is ironed or pressed on the duller side and avoid excessive friction or heat which can damage the satin surface. Always iron on a medium setting and consider using a press cloth.