Shopping.co.uk

Godox X3 Wireless Flash Trigger

Not AvailableGodox X3 Wireless Flash Trigger
Not Available

The Godox X3 2.4GHz wireless flash trigger for Canon features a sleek, minimalistic design with a ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later.

Product Information

Full details

The Godox X3 Wireless Flash Trigger for Canon is designed for photographers seeking to streamline their workflow with an intuitive, touch-screen interface. Its key benefit is effortless control over flash settings and seamless TLL/Manual mode switching. A potential caveat is its reliance on the 2.4GHz wireless system, which may face interference in extremely crowded RF environments. This trigger offers TTL, HSS, and multi-flash modes with a user-friendly OLED touchscreen and a robust hotshoe for secure camera mounting.

All features

BrandGodox

Extended Product Information

FAQs

What cameras is the Godox X3 compatible with?

The Godox X3 is designed for Canon EOS cameras with a standard hotshoe. It is compatible with Godox X-system flashes.

How do I switch between TTL and Manual mode?

You can switch between TTL and Manual mode effortlessly using the two-way TCM function. Simply tap the TCM button on the touchscreen to convert from TTL to Manual, or vice-versa.

Can I adjust the touchscreen brightness?

Yes, the brightness of the OLED touchscreen can be adjusted by sliding your finger left or right on the screen. This allows for optimal visibility in different lighting conditions.

Does the X3 support High-Speed Sync (HSS)?

Yes, the Godox X3 supports High-Speed Sync, enabling flash synchronization at shutter speeds faster than your camera's native sync speed.

How is the X3 powered and charged?

The Godox X3 has a built-in rechargeable battery and is charged using the included USB-C cable. A charging indicator is displayed on the screen.

What is included in the package?

The package typically includes the Godox X3 Flash Trigger, a USB-C Charging Cable, and a Storage Case.

How do I ensure a secure connection to my camera?

The X3 features a robust and easy-mounting hotshoe. Ensure it is slid fully onto the camera's hotshoe and secured by the locking mechanism for optimal stability and protection.

Troubleshooting

Flash does not fire.

Ensure the X3 is securely mounted on the camera's hotshoe. Check that both the camera and the X3 are powered on. Verify that the X3 is paired with the flash and that the flash has sufficient battery power. Confirm the correct channel and group settings are selected on the X3 and the flash.

Touchscreen is unresponsive.

Ensure your fingers are clean and dry. Try restarting the X3 by powering it off and then on again. If the issue persists, check for firmware updates that may resolve software glitches.

Inaccurate exposure in TTL mode.

Use the exposure compensation function on the X3 or your camera to adjust flash output. Ensure there are no strong ambient light sources directly affecting the camera's TTL metering. Try the TCM function to convert a good TTL exposure to manual.

Difficulty mounting to camera.

Ensure the locking mechanism on the camera's hotshoe is fully open. Align the X3's hotshoe with the camera's hotshoe and slide it on firmly until it clicks. Do not force the trigger if it resists; check for obstructions.

Pros and Cons

Pros

  • Intuitive touchscreen interface simplifies operation.
  • Seamless TLL to Manual mode conversion (TCM).
  • Supports essential flash modes like HSS, front/rear curtain sync.
  • High-contrast OLED display is clear in various lighting.
  • Robust hotshoe ensures secure camera attachment.

Cons

  • Relies on 2.4GHz wireless, potentially susceptible to interference.
  • Specific to Canon cameras, limiting cross-brand compatibility.
  • Touchscreen might be less responsive with gloves.
  • Requires charging via USB-C, adding another cable to manage.

Setup, Compatibility & Care

Setup:

  1. Ensure your Canon camera is turned off.
  2. Slide the Godox X3 trigger onto the camera's hotshoe until it clicks securely.
  3. Turn on your camera, then turn on the Godox X3 trigger.
  4. The trigger should automatically pair with compatible Godox flashes within range. If not, consult the manual for manual pairing instructions.

Compatibility:

  • Primarily designed for Canon EOS cameras with a standard hotshoe.
  • Compatible with Godox X-series flashes (e.g., Godox TT350C, TT600C, V860III C, AD200 Pro, AD300 Pro, AD400 Pro).

Care:

  • Clean the touchscreen and body with a soft, dry microfiber cloth. Avoid abrasive cleaners or liquids.
  • Keep the hotshoe contacts clean to ensure a stable connection. Use a dry cloth or a cotton swab if necessary.
  • Store the trigger in its included storage case when not in use to protect it from dust and damage.
  • Charge the battery using the provided USB-C cable. Avoid exposing the trigger to extreme temperatures or moisture.