Best current price£35.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£35.99Visit shop B&Q - Sbc90 Sandblasting Cabinet Window Protective Film 300X400mm 10Pack
Visit shop3 offers from £35.99
View price history by clicking the chart icon.
The Switzer Sandblasting Cabinet Window Protective Film is designed for professionals and hobbyists using the SBC90 sandblasting cabinet who need to maintain clear visibility through the viewing window during intensive projects. These replacement films provide a sacrificial layer that protects the glass from pitting and etching caused by abrasive media, ensuring long-term cabinet maintenance and safety. A key caveat to keep in mind is that these films are specific to the 300x400mm dimension, so precise measurement of your existing window is required to ensure a correct fit.
| Model Part Number | B576-142 |
|---|---|
| Brand | Switzer |
These films are sized specifically at 300x400mm. If your cabinet window matches these dimensions exactly, they should fit, but they are optimized for the SBC90 model.
No, once the film is removed, the adhesive integrity is compromised, and the surface is typically too pitted to provide clear visibility.
There is no set time frame; change the film whenever you notice that your view of the internal cabinet space has become too obscured to work safely.
When clean, the film is highly transparent and has a negligible impact on internal visibility.
A small amount of rubbing alcohol or a dedicated adhesive remover applied to a lint-free cloth will typically dissolve the leftover glue without damaging the glass.
Ensure the glass is completely free of dust and oil before application. Press the adhesive border firmly onto the glass surface.
Start application from one side of the window and use a flat edge, like a squeegee or credit card, to press the film down evenly as you move across the surface.
To ensure the film performs correctly, start by thoroughly cleaning your cabinet's window glass with an ammonia-free glass cleaner and wiping it dry to remove all dust, grease, and moisture. Peel the backing from the adhesive border of the Switzer film and align it carefully with the edges of your SBC90 viewing window. Smooth the film from the center outward to ensure there are no air bubbles. When visibility decreases significantly, remove the old film by pulling from a corner; if any adhesive residue remains, use a mild solvent before applying a new sheet.
