Best current price£449.99from Marks Electrical
Shopping.co.uk recommended and popular offers
Marks Electrical£449.99Visit shop Blomberg 9 kg Heat Pump Tumble Dryer - White - A++ Energy Rating LTA19321W
Visit shop1 offer from £449.99
View price history by clicking the chart icon.
The Blomberg LTA19321W is a freestanding 9kg heat pump tumble dryer ideal for busy households seeking energy-efficient and fabric-friendly drying. Its key benefit lies in the heat pump technology that uses lower temperatures to protect clothes and reduce running costs, while sensor drying ensures laundry is dried to perfection without over-drying. A potential caveat is its need for an ambient temperature above 5°C to operate optimally.
| Colour | White |
|---|---|
| Energy Efficiency | A++ |
| Model Part Number | LTA19321W |
| Brand | Blomberg |
A heat pump dryer uses a refrigeration system to heat the air that dries your clothes, similar to an air conditioner working in reverse. This method is more energy-efficient and gentler on fabrics as it dries at lower temperatures.
The fluff filter (inside the door) should be cleaned after every drying cycle. The condenser filter (at the base) should be cleaned regularly, ideally every 5-10 cycles or when indicated by the machine.
This dryer is designed to operate optimally in ambient temperatures above 5°C. Installation in a cold garage where temperatures may drop below this could affect performance and potentially damage the appliance.
The drum rotates in alternating directions. This action helps to separate clothes during the drying cycle, reducing tangling and minimizing deep creases, which makes ironing easier.
After each cycle, carefully pull out the water collection tank located at the bottom of the dryer. Empty the collected water, then slide the tank back into its housing until it locks securely.
The Blomberg LTA19321W comes with a 5-year warranty, providing peace of mind for your purchase.
The noise level is rated at 64 dB, which is comparable to normal conversation. While not silent, it is within the typical range for modern tumble dryers.
Ensure the power cord is securely plugged in. Check that the door is fully closed. Verify that the Delay Start timer is not active. If the issue persists, check your home's circuit breaker.
Check if the correct program was selected. Ensure the load is not too large for the 9kg capacity. Clean the fluff filter and condenser filter, as blockages impede airflow and drying efficiency. Make sure the selected drying level is appropriate.
This is often caused by blocked filters (fluff and condenser). Clean them thoroughly. Also, ensure the ambient temperature is within the operating range (above 5°C) and that the load is not overloaded. The heat pump system may naturally take longer than older technologies, but excessive times indicate an issue.
The water tank is full and needs to be emptied. Carefully slide out the tank, empty its contents, and slide it back in securely until it clicks.
Refer to the user manual for specific error code meanings. Common codes relate to filter cleaning or water tank issues. Follow the manual's instructions for resolution.
Setup:
This is a freestanding tumble dryer. Ensure it is placed on a firm, level surface. Allow adequate ventilation around the appliance, with at least a few centimeters of space at the back and sides.
Compatibility:
Care:
