Antiference Indoor TV Signal Splitter - 3 Way F-Type
Best current price£7.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£7.99Visit shop - Antiference As03 3 Way F-Type Indoor Tv Signal Splitter
Visit shopB&Q£7.99Visit shop All Offers
2 offers from £7.99 - £9.99
View price history by clicking the chart icon.
B&Q - Antiference As03 3 Way F-Type Indoor Tv Signal Splitter
Free delivery in 1–3 days
£7.99
Visit shop
Product Information
Full details
This Antiference indoor TV signal splitter is designed for users needing to distribute a coaxial TV signal to multiple devices. Its key benefit is providing a clean signal split with DC pass-through for preamps, ensuring compatibility with various setups. A potential caveat is that signal degradation can occur with excessive splits, so it's best used for 2-3 devices.
All features
| Model Part Number | AS03 |
|---|---|
| Brand | ANTIFERENCE |
Extended Product Information
FAQs
What is DC pass-through and why is it important?
DC pass-through means the splitter allows direct current (DC) electrical power to flow through its coaxial connections. This is crucial for powering active devices like aerial preamplifiers, which require a power source to boost the TV signal before it reaches the splitter.
Can I use this splitter for satellite TV?
Yes, this splitter is compatible with satellite TV signals provided they use F-type coaxial connections and the signal strength is adequate for distribution after splitting.
Will splitting the signal reduce quality?
All signal splitters cause some degree of signal loss (attenuation). For 3 outputs, the loss is generally manageable for most standard TV viewing. If you experience a noticeable degradation in picture quality, you may need to install a signal amplifier.
How do I connect the ground point?
The ground point should be connected using a separate earth wire (typically 4mm2 or 6mm2) to your home's main electrical earth grounding system for safety. Consult a qualified electrician if you are unsure.
What is the difference between F-type and other coaxial connectors?
F-type connectors are the standard for modern TV and satellite installations, featuring a threaded coupling for a secure connection. They are common on coaxial cables and most TV equipment, ensuring a reliable connection and good signal integrity.
Can I use this splitter outdoors?
No, this splitter is designed for indoor use only and should be protected from moisture and extreme temperatures.
Troubleshooting
No signal on any connected TV
Verify that the main coaxial cable is securely connected to the input port. Check that the source signal (aerial/dish) is functioning correctly. Ensure the splitter is not faulty by testing the input cable directly to one TV.
Weak or pixelated signal on one or more TVs
Signal loss is inherent with splitters; consider adding a signal amplifier if distributing to many devices or over long distances. Check all cable connections for tightness and ensure cables are not damaged. If using a preamp, confirm DC pass-through is functioning and the preamp is powered.
One TV works, but others do not
Check the coaxial cables connecting the splitter to the non-working TVs. Try swapping cables or ports to isolate if the issue is with a specific cable, port, or TV.
Preamp not receiving power through the splitter
Ensure the 'IN' port and at least one 'OUT' port are connected. Confirm your set-top box or power supply unit is providing DC voltage. Verify that the cables used are suitable for DC pass-through.
Pros and Cons
Pros
- Distributes TV signal to up to three devices.
- F-type connectors offer wide compatibility.
- DC pass-through supports powered preamplifiers.
- Integrated ground point adds a layer of safety.
- Compact design suitable for indoor use.
Cons
- Signal loss may occur, especially with long cable runs.
- Not suitable for outdoor environments.
- May not be sufficient for more than 3 outputs without additional amplification.
- Requires F-type coaxial cables.
Setup, Compatibility & Care
Setup:
- Ensure the splitter is located indoors in a dry environment.
- Connect the main coaxial cable feed (from your aerial or satellite dish) to the 'IN' port on the splitter.
- Connect coaxial cables from the 'OUT' ports to your televisions, set-top boxes, or other receiving devices.
- For safety, connect a grounding wire from the 'GROUND' terminal on the splitter to your home's main earth ground point.
Compatibility:
- The splitter uses standard F-type female connectors, compatible with F-type male coaxial cables.
- It works with standard analogue and digital terrestrial (DTT) and satellite TV signals.
- The DC pass-through feature is compatible with most aerial preamplifiers and related power supply units.
Care:
- Wipe the exterior with a dry or slightly damp cloth only. Do not use abrasive cleaners or solvents.
- Ensure all connections are kept clean and free from dust and moisture to maintain signal integrity.