Best current price£60.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£60.00Visit shop B&Q - Britwall Linear Acoustic Wall Panels Dark Brown Wood Grain 2400 X 600 X 21 mm
Visit shop5 offers from £60.00 - £174.00
View price history by clicking the chart icon.
The ENER-J Linear Acoustic Wall Panel is designed for homeowners and interior designers looking to combine contemporary aesthetic appeal with functional sound management in residential or office spaces. Its primary benefit is the combination of a sophisticated PW-Grey engineer wood texture with sound-absorbing properties that significantly reduce echo in media rooms or open-plan offices. A key caveat to consider is that while installation is straightforward, the panels come in large 2400mm lengths, requiring careful measurement and handling to ensure a seamless alignment on your wall surface.
| Model Part Number | AP013-2 |
|---|---|
| Brand | ENER-J |
While designed for walls, they can be installed on ceilings if proper structural support and high-strength adhesive are used, though professional consultation is recommended for overhead installations.
You will generally need a level, a tape measure, a fine-tooth saw for cutting to length, a pencil for marking, and construction-grade adhesive or screws.
No, they are made with MDF and PET and are intended for interior use only. They should not be installed in bathrooms or areas with high moisture.
The panels come pre-finished with a PVC laminate in PW-Grey. Painting is not recommended as it may not adhere well to the laminate surface and will ruin the engineered wood texture.
Each pack contains two panels, each measuring 2400mm x 600mm.
While primarily designed for acoustic absorption, the added layer of MDF and PET does provide a minor level of thermal insulation to the wall.
Check that your starting panel is perfectly plumb. If the wall is uneven, you may need to shim the back of the panel to ensure it sits flat against the surface.
Ensure that the PET felt backing is not caught between the edges during installation and that panels are firmly pushed together before securing.
Check that enough adhesive was applied across the back of the panel or that mechanical fasteners are fully countersunk into the structure.
For setup, ensure your wall surface is clean, dry, and flat. You can mount these panels using recommended high-strength construction adhesives or mechanical fasteners depending on your wall substrate. Always use a level to ensure the first panel is perfectly vertical, as subsequent panels will align against this. For cutting to height, a fine-tooth saw or circular saw with a guide is recommended to ensure clean edges on the MDF/PET composition.
For care and maintenance, wipe the surface down with a soft, slightly damp cloth to remove dust. Avoid using abrasive sponges or harsh chemical cleaners, as these can dull the PVC laminate finish. If liquid is spilled on the surface, wipe it up immediately to prevent moisture from seeping into the MDF core.
