Best current price£111.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£111.95Visit shop B&Q - Wpkt7A Tongue And Groove Wall Panel Kit (T) 9mm (W) 125mm (L) 1200mmPack Of 2
Visit shop1 offer from £111.95
View price history by clicking the chart icon.
The Cheshire Mouldings Tongue and Groove MDF Wall Panel Kit is an ideal solution for DIY enthusiasts and homeowners looking to add architectural character and texture to their interior walls. These panels offer a straightforward way to achieve a professional-looking wainscoting or feature wall effect with minimal effort, though users should note that they require personal priming and painting to match their specific decor as they arrive in a raw MDF finish.
| Model Part Number | Wpkt7A |
|---|---|
| Brand | Cheshire Mouldings |
They can be used in bathrooms provided they are not in a zone subject to direct water splashing and are well-sealed with moisture-resistant paint.
Yes, a light sanding with fine-grit sandpaper is recommended to ensure a smooth finish and better paint adhesion.
A standard hand saw or circular saw with a fine-tooth blade is ideal for making clean cuts to your required height.
It is strongly recommended to remove old wallpaper and prepare the bare wall surface for the best possible adhesion.
These panels are standard MDF and do not possess specific fire-retardant ratings; check your local building regulations if installing in high-risk areas.
Check for debris in the tongue and groove channel and ensure the wall surface behind the panel is perfectly flat.
Ensure a high-quality MDF primer is applied before the topcoat, as raw MDF can be porous and absorb paint unevenly.
Verify that the adhesive used is suitable for MDF and masonry, and ensure sufficient pressure was applied during the initial curing time.
Installation requires basic woodworking tools including a spirit level, a saw for cutting to length, and a high-strength panel adhesive. First, ensure your wall is flat and clean. Use a spirit level to ensure the first panel is plumb, then apply the adhesive to the back of the panel and press firmly against the wall. Connect subsequent panels using the tongue and groove edges. Once installed, lightly sand the surface before applying a quality MDF primer followed by your chosen topcoat. To care for your panels, simply wipe them down with a soft, dry cloth; avoid using heavy moisture or abrasive cleaning agents, as this can degrade the finish or the MDF core over time.
