API SuperClean 60 Filtration Foam Aquarium Internal Filter Filtration Pad - 1-Count
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for aquarium owners using the API SuperClean 60 Internal Filter. The SuperClean 60 Filtration Foam pad provides an effective way to remove large waste particles, ensuring clearer water. A key consideration is its specific fitment for the SuperClean 60 model, making it unsuitable for other filter types.
All features
| Brand | API |
|---|
Extended Product Information
FAQs
What size aquariums is the API SuperClean 60 filter and foam pad suitable for?
The API SuperClean 60 filter is generally recommended for aquariums up to 20 gallons, depending on the bioload. The foam pad is specifically designed for this filter model.
How often should I wash the filtration foam pad?
You should wash the API SuperClean 60 Filtration Foam pad approximately once a month to maintain filter efficiency.
When should I replace the foam pad?
It is recommended to replace the foam pad every three months to ensure optimal filtration performance.
Can I use this foam pad with other API filters?
No, this specific foam pad (API FILTRATION FOAM 60) is designed exclusively for the API SuperClean 60 internal filter. Using it with other models may result in a poor fit and reduced effectiveness.
Is it important to rinse the foam pad with aquarium water?
Rinsing the foam pad with used aquarium water is ideal as it helps preserve beneficial nitrifying bacteria that colonize the filter media, contributing to the biological filtration of your tank.
What type of filtration does this foam pad provide?
This foam pad primarily provides mechanical filtration by trapping large waste particles. It also offers some surface area for beneficial bacteria, contributing to biological filtration.
Can I use this in both freshwater and saltwater tanks?
Yes, the API SuperClean 60 Filtration Foam pad is safe and effective for use in both freshwater and saltwater aquarium environments.
Troubleshooting
Filter flow rate decreases significantly.
The filtration foam pad is likely clogged. Remove and rinse the pad thoroughly with used aquarium water or clean, cool tap water. If the issue persists after cleaning, the pad may need replacement.
Water remains cloudy after installing new pad.
Ensure the foam pad is the correct size and installed properly to create a seal. This pad is designed for mechanical filtration of large particles; other filtration media may be needed for finer clarity or biological filtration.
Pad disintegrates or tears easily.
Handle the foam pad gently during cleaning and installation. If the pad is old and brittle, it's time for a replacement as per the recommended schedule (every 3 months).
Pros and Cons
Pros
- Effectively removes large debris and waste.
- Ensures a clear and healthy aquatic environment.
- Designed for a perfect fit with the API SuperClean 60 filter.
- Versatile for use in both freshwater and saltwater tanks.
- Simple maintenance routine for sustained performance.
Cons
- Only compatible with the API SuperClean 60 filter model.
- Requires regular washing to prevent clogging.
- Needs replacement every three months for optimal effectiveness.
- Primarily filters large particles, may require additional media for fine filtration.
Setup, Compatibility & Care Instructions
Compatibility:
This filtration foam pad is specifically designed to fit the API SuperClean 60 Internal Filter. It is not interchangeable with other filter models.
Setup:
- Gently remove the old filtration foam pad from your API SuperClean 60 filter.
- Rinse the new API SuperClean 60 Filtration Foam pad under clean, cool tap water to remove any dust or loose particles.
- Insert the new foam pad into the designated compartment within the API SuperClean 60 filter, ensuring a snug fit.
- Reassemble the filter and place it back into the aquarium.
Care:
- Washing: Rinse the filtration foam pad monthly under used aquarium water or clean, cool tap water. Avoid using chlorinated tap water or hot water, as this can harm beneficial bacteria.
- Replacement: Replace the filtration foam pad every three (3) months to maintain optimal filtration efficiency and prevent the buildup of nitrates.