E-TECH Car Alloy Wheel Paint - Metallic Silver - 400ml

A 400ml can is usually sufficient for a set of four wheels, depending on the wheel size and the number of coats applied.

While not always necessary, using a primer can improve adhesion and the overall finish. Follow the manufacturer's recommendations.

Drying times vary. Refer to the product label for specific instructions.

This paint is specifically formulated for alloy wheels. It is not recommended for use on other surfaces.

Clean the wheels with a mild soap and water solution. Avoid using abrasive cleaners or harsh chemicals.

Please refer to the product packaging or your point of purchase for warranty information.

Ensure the wheel surface is properly prepared by cleaning, degreasing, and sanding. Apply a primer if necessary.

Apply thin, even coats of paint, allowing each coat to dry properly before applying the next. Avoid applying too much paint at once.

Ensure the wheel surface is properly prepared. Apply several thin coats rather than a single thick coat. Avoid exposing the painted wheels to extreme conditions before the paint has fully cured.