10mm Flexi Ratchet Combination Spanner - AB Tools - TF434

The spanner is manufactured from durable chrome vanadium steel with a mirror-polished finish.

The ratchet mechanism features a 72-tooth action for precise grip and minimal swing arc.

While the ratchet is intended for speed work, it's best to use the open-ended side to initially loosen very tight or seized bolts to avoid stressing the ratchet mechanism. The ratchet is ideal for rapid tightening and loosening once the fastener is free.

The total length of the spanner is 160mm.

You can switch between forward and reverse fastening by simply turning the spanner 180 degrees.

This spanner is designed for commercial or occasional use and is well-suited for tasks requiring access in tight spaces. For extreme torque applications, a dedicated breaker bar or impact socket might be more appropriate.

Clean the ratchet head thoroughly with a brush to remove any dirt or debris. If the issue persists, a small amount of penetrating oil or dry lubricant can be applied to the mechanism.

Ensure you are using the correct size (10mm) and that the fastener head is not damaged. Check that the spanner jaws are clean and free from oil or grease.

This spanner is designed for controlled movement. If the pivot is excessively loose, it might indicate wear. Ensure you are not applying side-load forces that could exceed its design parameters.