Protect your vehicle's sills and many other areas with this polyurethane plastic sill guard. Preve...Protect your vehicle's sills and many other areas with this polyurethane plastic sill guard. Preventing scratches and scuffs, this easy to fit guard is coated with a clear shine finish for ideal durability and shine. The guard can also be applied to stainless steel, ceramic, plastic and more. It is easy to fit and can be cut into pieces based on the area you wish to cover. Directions: Clean surface and allow to dry. Mix together water and washing up liquid. Cut appropriately sized piece. Peel away backing paper and wet film in solution. Slide into place with adhesive side down. Squeeze excess liquid and air from beneath film.
Simply - Door Sill Guard |Black |8CM X 5M |Clear Coat Finish |DIYFree delivery in 1–3 days£13.00Visit shop →
Product Information
Full details
This guide helps owners of vehicles protect their door sills and other vulnerable areas using the Simply Car Door Sill Guard Protector. It's designed to prevent scratches and scuffs, offering a durable, clear finish. Note that while easy to install, proper surface preparation is crucial for optimal adhesion.
All features
Model Part Number
DS-1405B
Brand
Simply
Extended Product Information
FAQs
What is the guard made of?
The guard is made of polyurethane plastic.
Can I use this on painted surfaces?
Yes, it is designed for use on painted surfaces, as well as stainless steel, ceramic, and plastic.
How do I clean the guard?
Clean the guard with a mild soap and water solution.
Can I remove the guard after application?
Yes, you can remove the guard, though it may leave some adhesive residue. Cleaning with a residue remover may be needed.
What if I get air bubbles?
Use a soft cloth or squeegee to gently push the air bubbles towards the edges.
Can I cut the guard to fit?
Yes, the guard can be cut to fit your vehicle's specific needs.
Is the finish glossy?
Yes, the guard has a clear, shine finish.
How long will the guard last?
With proper care, the guard is designed for long-lasting protection.
Troubleshooting
Guard is not adhering properly.
Ensure the surface is thoroughly cleaned and dry before application. Use the soapy water solution to allow adjustments during installation and squeeze out all excess liquid and air.
Air bubbles are trapped under the guard.
Use a soft cloth or squeegee to gently push the air bubbles towards the edges of the guard.
The guard is too large for the area.
Carefully trim the guard to the correct size using a sharp blade or scissors before application.
Pros and Cons
Pros
Prevents scratches and scuffs on door sills and other areas.
Durable polyurethane plastic construction.
Clear shine finish maintains vehicle aesthetics.
Easy to install with simple instructions.
Versatile application on multiple surfaces.
Cons
Requires careful surface preparation for optimal adhesion.
May require cutting to fit specific vehicle models.
The initial application may take some time.
Setup, Compatibility & Care
Preparation: Clean the surface of the application area thoroughly. Ensure the surface is dry before applying the guard. Mix together water and washing up liquid. This will serve as a lubricant and allow you to adjust the guard's position during installation.
Cutting: Measure and cut the guard to the appropriate size and shape.
Application: Peel away the backing paper and wet the film with the water and washing up liquid solution. Apply the guard to the desired surface, adhesive side down. Slide it into place.
Final Steps: Squeeze out any excess liquid and air bubbles from beneath the film, using a soft cloth or squeegee. Allow it to dry.
Compatibility:
The Simply Car Door Sill Guard Protector is designed to fit a wide range of vehicles.
It is suitable for use on stainless steel, ceramic, and plastic surfaces.
Care:
Clean the guard with a mild soap and water solution.