Scalemaster SOFTLINE 150 NON ELECTRIC Water Softener

Best current price£792.37from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
Scalemaster Sl150 Standard Non Electric 5 Person Water Softener 15Mm 900100
Visit shop
Best current price£792.37from City Plumbing GB
Shopping.co.uk recommended and popular offers
Scalemaster Sl150 Standard Non Electric 5 Person Water Softener 15Mm 900100
Visit shop1 offer from £792.37
View price history by clicking the chart icon.
The Scalemaster SOFTLINE 150 is designed for UK homeowners seeking a simple, effective, and environmentally conscious solution to hard water problems. Its key benefit lies in its non-electric operation, eliminating Part P compliance concerns and reducing running costs. A potential caveat is its suitability primarily for conventional 15mm gravity-fed plumbing systems. This compact unit utilizes the water's hydraulic pressure to automatically soften water without motors or wires, making it easy to install and maintain.
| Model Part Number | SOFTLINE 150 |
|---|---|
| Brand | Scalemaster |
No, the Scalemaster SOFTLINE 150 operates entirely on the hydraulic pressure of the incoming water. It does not have any motors or wires.
It is specifically designed for conventional 15mm gravity-fed plumbing systems commonly found in UK homes.
The frequency of salt replenishment depends on your water usage and hardness. Regularly check the salt level and add salt as needed.
Each regeneration cycle uses approximately 330 grams of salt and 18 litres of water.
Yes, the unit is designed for ease of installation with its integrated bypass and clip system, reducing the time and complexity of setup. Basic plumbing knowledge is recommended.
The SOFTLINE 150 operates from as little as 0.8 bar of water pressure.
Yes, the Scalemaster Softline is suitable for use with both mains water and water from a well.
Check salt levels and replenish if low. Ensure the water pressure is sufficient (minimum 0.8 bar). Verify that the bypass valve is in the correct position for softening.
Inspect all connections for tightness. Ensure seals and O-rings are correctly seated. If the leak persists, contact customer support.
Some operational noise during regeneration is normal. If the noise is excessive or unusual, check for obstructions or call for service.
Refer to the installation diagram and ensure all connections are made according to the instructions. The integrated bypass and clip system are designed for ease of use.
Setup:
Compatibility:
Care: