Best current price£55.99from The Range
Shopping.co.uk recommended and popular offers
The Range£55.99Visit shop Fine Decor Floor Pops Starlight Self-Adhesive Vinyl Floor Tiles - Black
Visit shop3 offers from £55.99 - £99.99
View price history by clicking the chart icon.
The Floor Pops Starlight Self-Adhesive Vinyl Floor Tiles are designed for homeowners and renters seeking a budget-friendly, DIY way to refresh kitchen or bathroom floors without the mess of grout or heavy construction. These tiles offer an immediate aesthetic upgrade with a durable, water-resistant finish capable of handling high-traffic zones; however, users should be aware that they are not slip-resistant and are strictly intended for indoor use on flat, clean, and hard surfaces.
| Model Part Number | 1462742 |
|---|---|
| Brand | Fine Decor |
No, these tiles are not designed for direct contact with running water or constant immersion, and should not be used in shower cubicles.
Yes, they are not slip-resistant. Use caution in areas where water might be present and consider placing rugs or mats down.
No, these tiles must be applied to a hard, clean, and flat surface to ensure proper adhesion.
The tiles are 1.5mm thick, providing a durable surface for foot traffic.
No, these are strictly for indoor use and are not rated for outdoor weather conditions.
No, these are designed as a peel-and-stick solution and do not require grout.
Ensure the subfloor was completely clean and dry during application. You may apply a small amount of heavy-duty vinyl adhesive to the underside of the lifted corner.
Use a rolling pin or a hard, flat object to press the air bubble toward the nearest edge of the tile during the initial installation.
Check if the subfloor has cracks or debris. If the subfloor is not perfectly flat, these imperfections will be visible through the tile.
To ensure maximum longevity, proper surface preparation is critical. The subfloor must be dry, flat, and free of dust, wax, or grease. Peel the backing off carefully to avoid damaging the adhesive, and apply pressure evenly across the entire surface of each tile to activate the bond. For routine cleaning, use a damp cloth or a mild floor cleaner. Avoid harsh chemical agents or abrasive scouring pads that may dull the finish. Since these are not slip-resistant, it is recommended to use mats in high-moisture areas to mitigate the risk of sliding.
