Best current price£4.86from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£4.86Visit shop Polypipe 32mm Solvent Weld ABS Spigot Bend 45 Degree Black WS48B
Visit shop1 offer from £4.86
View price history by clicking the chart icon.
The Polypipe Waste Solvent Weld ABS Spigot Bend (32mm x 45deg, Black) is designed for plumbers and DIY enthusiasts needing a reliable fitting to change direction in residential wastewater systems. Its primary benefit is providing secure, leak-resistant connections for precise pipe routing in tight spaces. A potential caveat is that it requires specific solvent cement for ABS, which must be purchased separately. This fitting offers robust durability and chemical resistance due to its A.B.S. construction and ensures permanent joints through its solvent weld system. It is part of Polypipe's comprehensive Waste Systems range and is compatible with both ABS and MUPVC waste products.
| Model Part Number | WS48B |
|---|---|
| Brand | Polypipe |
You should use a solvent cement specifically designed for ABS (Acrylonitrile Butadiene Styrene) pipes and fittings, along with a compatible ABS primer.
The A.B.S. material used in this fitting can handle higher operating temperatures than some other plastics, making it suitable for most domestic hot water waste applications. However, always check specific temperature limits if dealing with exceptionally high temperatures.
This fitting is designed for residential waste water management, typically within buildings. For external drainage, consult local building regulations and consider materials specifically rated for external UV exposure and ground conditions.
While this fitting is part of a system compatible with MUPVC, it is an ABS fitting. For joining ABS to PVC, a transition fitting or specific solvent cement might be required. Always refer to manufacturer guidelines for mixed material installations.
A minimum of 24 hours is generally recommended for the joint to fully cure and reach its maximum strength before the system is put into use.
ABS is generally more robust, has better impact resistance, and can tolerate higher temperatures than MUPVC. Both are common in waste systems, and Polypipe offers products that allow for integration between the two.
A 45-degree bend introduces some resistance compared to a straight pipe, but it is designed to maintain efficient flow for typical waste water volumes in residential settings. It is a standard angle for managing direction changes effectively without severely impacting performance.
Ensure the pipe was fully inserted into the socket and held for the required time. Re-check the joint for any visible gaps or cracks. If leakage persists, the joint may need to be cut out and re-made.
Verify that the pipe and fitting are the correct size (32mm). Ensure the surfaces are clean and dry. A slight twisting motion can help, but do not force the joint if resistance is significant, as this could damage the pipe or fitting.
Ensure correct ABS primer and solvent cement are used. Surfaces must be clean and dry before application. Check the expiry date of the solvent products; old cement may lose its effectiveness.
Setup:
Compatibility:
Care:
