Franke Triflow Doric - Cold Valve

This product is a replacement cold valve specifically for the Franke Triflow Doric tap, designed to fix leaks and drips from the spout.

No, this valve is for the original Franke Triflow Doric tap (discontinued in 2011). It is not compatible with the later FilterFlow Doric model.

You likely need to replace the cold valve if your Franke Triflow Doric tap is dripping or leaking from the end of the spout when turned off.

The kit includes a high-quality brass, quarter-turn ceramic cold valve and white plastic verniers where required for installation.

The valve is designed for a fast, easy fit. Detailed installation guides are available to download, and technical support is provided if needed.

This product is guaranteed for 12 months from the date of purchase.

Yes, with basic DIY skills and the provided installation guides, you can typically replace the valve yourself. If you are unsure, it is recommended to consult a qualified plumber.

Ensure the new valve was installed correctly and is fully seated. Check that the water supply was turned off completely before installation and that no debris entered the valve seat. If the issue persists, the tap body itself might be damaged, or the hot valve may also need replacement.

Verify that the valve was not overtightened during installation. Ensure the plastic verniers are correctly aligned. If stiffness persists, apply a small amount of silicone-based plumber's grease to the valve O-rings (if accessible) before final tightening.

Check that the valve retaining nut is securely tightened. Ensure the O-rings on the valve are intact and properly seated. If the leak continues, the valve itself or the tap's internal seals may be faulty.

The original Triflow Doric was discontinued in 2011. If your tap is newer or you are unsure, consult your original product documentation or contact Franke customer support with your tap's model details.