Pneumatic Triple Air Bag Jack 3 Ton Capacity 140 – 450mm - AB Tools
Professional triple air bag jack suitable for commercial or occasional use, offering a 3-ton pneum...Professional triple air bag jack suitable for commercial or occasional use, offering a 3-ton pneumatic lifting capacity. This jack is perfect for lifting heavy loads quickly and efficiently. It features a solid steel construction with a rubber cushion to prevent marking the lifted surface, ensuring maximum strength and durability. The highly sealed airbags are designed to prevent leaks or scratches. It's the easiest and safest way to raise one side of your car, van, caravan, SUV, etc., without damaging the chassis or paint. A high-strength plate supports a large rubber cushion for stable lifting and reduced risk of marking. Operation is simple via two valves (air in and air out), and it is fitted with a safety valve. It can lift loads from a height of 140mm to 450mm, inflating in approximately 6 seconds to full height. SPECIFICATIONS: Triple air bag jack, Maximum capacity – 3 ton (6600 lbs), Lifting height – 140mm – 450mm, Air inlet – 1/4in BSP, Air pressure – 87 – 116 PSI, Safety valve, Solid steel construction, Rubber cushion and nylon pad to avoid marking, CE approved, Conforms to BS EN ISO Regulations, Colour - Blue.
This AB Tools Pneumatic Triple Air Bag Jack is designed for professionals and occasional users needing to lift heavy loads quickly and safely. It offers a 3-ton lifting capacity with a height range of 140mm to 450mm, making it ideal for cars, vans, SUVs, and caravans. While it provides efficient lifting, users should ensure their air supply meets the recommended pressure for optimal performance and safety.
All features
Brand
AB Tools
Extended Product Information
FAQs
What is the maximum weight capacity of this jack?
The jack has a maximum lifting capacity of 3 tons (6600 lbs).
What is the lifting height range?
The jack can lift loads from a minimum height of 140mm up to a maximum of 450mm.
How long does it take to inflate?
It takes approximately 6 seconds to inflate to its full height, assuming adequate air supply.
What type of air connection does it use?
The air inlet is a 1/4in BSP fitting.
What air pressure is required?
The recommended air pressure for operation is between 87 and 116 PSI.
Will this jack damage my vehicle?
No, it features a high-strength plate supporting a large rubber cushion and a nylon pad designed to prevent marking or scratching the chassis or paint.
Does it come with an air compressor?
No, an external air source such as an air compressor is required for operation and is not included with the jack.
Troubleshooting
Jack does not inflate
Check the air hose connection to the inlet valve and ensure the air supply is turned on and at the correct pressure (87-116 PSI).
Slow inflation
Verify the air compressor's output capacity is sufficient. Check for any leaks in the air lines or connections.
Jack loses pressure after lifting
Inspect the triple air bags and all connections for leaks. Ensure the exhaust valve is fully closed.
Uneven lifting
Ensure the jack is positioned squarely under the vehicle's designated lifting point and that the lifting surface is stable and level.
Pros and Cons
Pros
Lifts heavy loads quickly and efficiently.
Protects vehicle surfaces with rubber cushion and nylon pad.
Durable construction for long-term use.
Safe operation with integrated safety valve.
Easy to use with simple valve controls.
Wide lifting range suitable for various vehicles.
Cons
Requires an air compressor or air supply.
Maximum lifting height may not be suitable for all specialized vehicles.
Needs proper ground clearance to be positioned under the vehicle.
Operation is dependent on correct air pressure (87-116 PSI).
Setup, Compatibility & Care
Setup:
Ensure the jack is placed on a stable, level surface.
Connect a suitable air source (compressor or tank) to the 1/4in BSP air inlet.
Verify the air pressure is within the recommended range of 87 – 116 PSI.
Compatibility:
Suitable for most cars, vans, caravans, and SUVs.
Requires an air compressor with a minimum output capable of maintaining the specified air pressure.
Care:
Regularly inspect the airbags and hoses for any signs of wear or damage.
Keep the jack clean; wipe down with a damp cloth as needed.
Store in a dry environment when not in use to prevent rust and damage.
Ensure the safety valve is functional before each use.