Festo 3/2 NC Monostable Air Solenoid Valve - G3/8 - 1600l/min

A monostable valve returns to its default position when the control signal is removed, requiring continuous power to stay actuated. A bistable valve remains in its last position even after the signal is removed, requiring a second, opposite signal to change state.

Yes, the VUVS-LT30-M32C-MD-G38-F8-1C1 is designed to be compatible with Festo's VTUS manifold systems for integrated solutions.

The nominal flow rate for this valve is 1600 liters per minute (l/min).

The valve is suitable for filtered, lubricated, or non-lubricated compressed air. However, using filtered air is always recommended to prolong the valve's lifespan.

The pneumatic connection size for this valve is G3/8.

As a monostable valve, it automatically resets to its neutral position when the electrical control signal is removed.

Check electrical supply to the solenoid coil. Verify control voltage matches valve specifications. Ensure the coil is correctly connected and not damaged. Check for any obstructions preventing valve movement.

Inspect pneumatic lines for kinks or blockages. Ensure air supply pressure is within the specified range. Check if the air filter in the system is clogged and needs cleaning or replacement. Verify the valve itself is not contaminated.

Confirm the valve is indeed monostable and not bistable. Check for a stuck internal spool. Ensure the exhaust port is clear and not obstructed.

Check for debris trapped in the valve seat. Ensure the pneumatic connections are not crossed. The valve may be worn and require replacement if internal seals are damaged.