HB BODY C496 Clear HS SR 2:1 2K Acrylic High Gloss Coating Repairs 5 Litre

Use the HB BODY Hardeners for Topcoats: H752 SLOW, H753 NORMAL, or H754 FAST. The choice depends on the application conditions (temperature, humidity) and desired drying time.

The mixing ratio is 2:1 (clear coat to hardener).

Apply two to three even coats, allowing the recommended flash-off time between coats.

Drying time depends on the hardener used and ambient conditions. Refer to the hardener's instructions for specific drying times.

Yes, but ensure the plastic is properly prepared and primed if necessary. Always check the base coat's compatibility with the plastic.

Always wear appropriate personal protective equipment (PPE), including a respirator, gloves, and eye protection. Work in a well-ventilated area.

Store in a cool, dry place away from direct sunlight. Ensure the container is tightly sealed.

Yes, once the clear coat is fully cured, you can polish it to remove minor imperfections and enhance the gloss.

Ensure proper spray gun settings, application distance, and even coats. Adjust the hardener or use a thinner if needed.

Apply thinner coats and avoid excessive product buildup. Adjust the spray gun settings and distance.

Ensure proper mixing ratios, use the correct hardener, and allow sufficient drying time. Consider polishing the surface after it has cured.

Thoroughly prepare the surface, ensuring it's clean and properly sanded. Use a compatible primer if necessary.

Ensure the correct hardener is used and that the ambient temperature is within the recommended range. Check for excessive humidity.