d-c-fix Decorative Film - Sangallo Light Grey Wood Effect 67.5cm x 2m

While the film has some flexibility, it's best suited for flat surfaces. Curved surfaces may be more challenging.

Wipe it with a damp cloth. Avoid using harsh chemicals or abrasive cleaners.

It is water-resistant, but prolonged exposure to water may affect the adhesive.

Yes, you can remove it, but it may leave some adhesive residue. Use a solvent like rubbing alcohol to remove any remaining adhesive.

It is heat resistant up to 70 degrees Celsius.

You'll need a measuring tape, scissors or a utility knife, a squeegee or soft cloth, and optionally, a hairdryer.

This product is available at various home improvement stores and online retailers.

Lift the film gently and smooth out the bubbles with a squeegee or soft cloth. Alternatively, use a pin to prick the bubble and smooth it out.

Ensure the surface is clean and dry. Make sure to apply adequate pressure during application, especially around the edges.

Trim the edges neatly and apply heat with a hairdryer to reactivate the adhesive, then press firmly. You can also use an edge sealer.