Best current price£400.00from Sports Direct UK
Shopping.co.uk recommended and popular offers
Sports Direct UK£400.00Visit shop Klevv Black Cras V Rgb 32Gb - 2X 16Gb Sticks, Sports Direct
Visit shop6 offers from £400.00 - £574.19
View price history by clicking the chart icon.
The Klevv CRAS V DDR5 32GB (2x16GB) 7600MHz memory kit is designed for high-end PC enthusiasts and gamers who require top-tier performance for intensive workloads and AAA gaming. It delivers exceptional speed and stability through advanced DDR5 technology and premium SK Hynix components, though users should ensure their motherboard and CPU can handle 7600MHz XMP/EXPO profiles for optimal performance.
| Series | CRAS V |
|---|---|
| Model Part Number | KD5AGUA80-76B360G |
| Brand | KLEVV |
Yes, to reach 7600MHz, you need a high-performance motherboard that supports high-frequency DDR5 XMP/EXPO profiles.
Mixing different memory kits is not recommended and can lead to system instability or lower performance.
The CRAS V 7600MHz kit operates at a CAS latency of 36.
The modules have a height of 44mm, designed to offer low clearance for large CPU coolers.
Yes, it features on-die ECC technology, which provides error detection and correction within the memory chip itself.
The memory kit operates at 1.4V to maintain the high performance of 7600MHz.
Ensure the modules are fully seated in the slots until the clips click; try one module at a time to rule out a single faulty stick.
Update your motherboard BIOS to the latest version and verify that your CPU's memory controller supports high-frequency DDR5.
Use your motherboard's native RGB control software to detect the memory modules, or download the Klevv-recommended control utility.
To install, ensure your system is powered down and the PSU is switched off. Insert the DIMMs into the secondary and fourth slots (A2/B2) for dual-channel operation on most motherboards.
Compatibility Note: 7600MHz is an extreme frequency. Always check your motherboard's QVL (Qualified Vendor List) to confirm support for 7600MHz kits.
BIOS Setup: Upon first boot, enter your BIOS settings and enable the XMP or EXPO profile. Without this step, the RAM will run at lower, default JEDEC speeds. Keep the modules clear of dust by using canned air occasionally to ensure the heatsinks maintain proper airflow.
