Best current price£22.99from eBay
Shopping.co.uk recommended and popular offers
eBay£22.99Visit shop Deta Stainless Steel 1 GANG LED Dimmer Switch Multi Way 3w-250W LED 8529SS
Visit shop
B&Q£54.20Visit shop B&Q - Sd1415Ss Universal Led Dimmer Switch 2 Gang 2 Way 3-250 Watt (Stainless Steel)
Visit shop9 offers from £22.99 - £214.25
View price history by clicking the chart icon.
The Deta Universal LED Dimmer Switch is designed for homeowners seeking to control lighting ambiance and efficiency. Its key benefit is smooth dimming for compatible LED lights, offering flexibility in room lighting. A potential caveat is its reliance on dimmable LED bulbs for optimal performance, as standard LEDs may not be compatible.
| Colour | Silver |
|---|---|
| Model Part Number | SD1415SS |
| Brand | Deta |
This dimmer is designed specifically for dimmable LED bulbs. It is not suitable for non-dimmable LEDs or older incandescent/halogen bulbs unless explicitly stated otherwise by the bulb manufacturer and within the dimmer's wattage limits.
Only if your existing LED bulbs are specifically rated as 'dimmable'. Standard LED bulbs are not compatible and may cause flickering or damage to the dimmer.
'2 Gang' means the switch has two independent dimmer controls. '2 Way' means each dimmer can be part of a 2-way switching circuit, allowing you to control a light from two different locations (e.g., top and bottom of stairs).
Each dimmer control (gang) can handle a load between 3 Watts and 250 Watts. Ensure the total wattage of the bulbs connected does not exceed this limit.
Installation requires basic electrical knowledge. For safety and compliance, it is recommended that a qualified electrician installs the dimmer switch.
Use a soft, dry or slightly damp cloth. Avoid abrasive cleaners or chemicals that could damage the finish.
This is a traditional dimmer switch and does not have built-in smart home capabilities. It controls the brightness of connected dimmable lights manually.
Ensure you are using dimmable LED bulbs. Non-dimmable LEDs or incompatible bulb types will cause flickering. Check that the total wattage of the connected bulbs is within the 3-250W range for each gang.
Verify that power is supplied to the switch and that all wiring connections are secure and correct according to the installation diagram. Consult a qualified electrician if unsure.
Check the wiring for the 2-way circuit. Ensure the 'traveler' wires are correctly connected between the two switches. This function requires specific wiring configuration.
Some warmth is normal, especially under higher load. However, if the dimmer feels excessively hot, check the total wattage of the connected bulbs to ensure it does not exceed the 250W maximum per gang. Overloading can cause overheating.
Setup: Installation of the Deta SD1415SS dimmer switch should be performed by a qualified electrician to ensure safety and compliance with electrical regulations. It replaces a standard light switch and requires wiring connections for both the switched live and the two-way functionality if applicable.
Compatibility: This dimmer is specifically designed for use with dimmable LED lamps. It is not compatible with traditional incandescent or halogen bulbs (unless specified by manufacturer and within wattage limits), or non-dimmable LED lamps. Always check that your LED bulbs are explicitly marked as 'dimmable'. The total wattage of the lamps connected to each gang must be within the 3-250 Watt range.
Care: To clean the dimmer switch, use a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents, which could damage the stainless steel finish. Ensure power is switched off at the mains before cleaning.
